On 02/16/2018 12:46 AM, Fabian Arrotin wrote: > On 15/02/18 21:59, Iván Chavero wrote: >> On 10/02/18 10:32, Fabian Arrotin wrote: >>> Hi, >>> >>> Some people asked for a newer 4.14 kernel recently as they'd like to >>> test some boards, and not rely on the initial kernel provided by the >>> vendor, so in fact relying on the mainline upstream kernel. >>> As some boards received support in newer 4.14 branch (now also LTS) >>> we're considering a bump from 4.9.x to 4.14.x branch for armhfp. >>> >>> Kernel 4.14.17-201.el7 was so built last week and is available in a >>> testing repo : .repo file that can be created is : >>> >>> [kernel-testing] >>> name=kernel-testing >>> baseurl=https://armv7.dev.centos.org/repodir/arm-kernels/kernel/ >>> enabled=1 >>> gpgcheck=0 >>> >>> If you can give feedback that would be appreciated. >>> So far it was tested on cubietruck and bananapi >>> >>> Cheers, >> >> >> I've tested on Centos cubietruck plus in the past and it didn't work >> because of >> sunxi options or patches that werent's added or enabled is there a guide >> to integrate >> this kernel to the image so i can test it? >> > > We never released a "Cubietruck plus" CentOS image , but only a > Cubietruck one (plus is cubieboard5 and cubietruck is cubieboard5) > Here is the image : > http://mirror.centos.org/altarch/7/isos/armhfp/CentOS-Userland-7-armv7hl-Minimal-1708-CubieTruck.img.xz > > But we have doc on the wiki about how to use an image/RootFS and just > adapt what's needed for other board : > > https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32#head-f796aaff2cabd850bde1d5dcc1443c048d68b5aa > > And Cubietruck_plus is listed there (but I only have a rpi2/rpi3 and > cubietruck at home, so I can't test all those boards). > > So can you test that procedure (almost 100% sure that it will work for > your board) ? > > Once you have booted it, you'll run the 4.9 kernel by default , and a > yum upate will bring you to the last one we released for that branch (so > 4.9.75) > > Then it's up to you to use the other testing repo to test kernel 4.14.17 > (it works fine on my Cubietruck) > I just tried the cubietruck plus with our u-boot and the custom 'u-boot-sunxi-with-spl.bin' for Cubietruck_plus from our build .. and also with the Fedora 28 Rawhide custom 'u-boot-sunxi-with-spl.bin' I get no video out OR DHCP ip4 or ipv6 address. I think this board is still not really supported .. as the current page for the 'A83T' (the SOC for the cubietruck plus) here is very much not yet in mainline: http://linux-sunxi.org/Linux_mainlining_effort I also tried booting Fedora 27 and it did not work for me. Thanks, Johnny Hughes -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20180216/024d49c0/attachment-0006.sig>