I take it you are referring to the 32-bit image, as I can't find a 64-bit one. I was shocked there are 64-bit Fedora 25 and 26 images available but not a CentOS 7 one, so I am putting one together at the moment. I'll post a link here on the list when I have tidied it up to make it presentable. One thing I still want to get working on it is Tianocore EFI, as at that point you don't need an image, you could just use the installer (if the installer iso were to be modified with a kernel that supports the Broadcom SoC, I'll see if I can spin up a suitable ISO with that modification when time permits). On 1 Jan 2018 13:32, "Fabian Arrotin" <arrfab at centos.org> wrote: > On 30/12/17 13:26, Philip Taylor wrote: > > Hi, I’m new to this list so I hope this isn’t a repeated question, but > my searches haven’t found any matches. > > > > I’m trying to use CentOS 7 on a Raspberry Pi 3 with motion and the > Raspberry Pi camera module. Has anyone done this successfully, or is it not > a supported configuration? > > > > Thank you. > > I don't we have supported or unsupported configurations, but rather > untested/untried ones :-) > As the kernel we ship is the upstream one from raspberrypi foundation > (we only add auditd/selinux) it should work (assuming that you only need > kernel modules) > Usually people tend to follow traditional tutorials and adapt those for > centos image, but I can't answer for the motion/pi camera module as I've > never tried that (and no hardware to test it either) > > What do you need that isn't already available/built ? > > -- > Fabian Arrotin > The CentOS Project | https://www.centos.org > gpg key: 56BEC54E | twitter: @arrfab > > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20180101/dce927da/attachment-0006.html>