OK, I found the AmeriDroid site. I overpaid from ebay... I see the case cover and power supply, but their uart-USB is very pricey. I am use to paying ~$2 each for the ones I get for my Cubies. But further research shows they use a different voltage so perhaps stuck with the higher price. :( On 11/27/18 11:42 AM, Robert Moskowitz wrote: > got myself an ODroid-HC1, but seems I forgot some things... > > Power supply! > > I have a right sized barrel to USB cable, but my Ankar is rated up to > 3A and is fused at any draw above that. I remember looking at power > supplies before, but can't find the link. > > UART to USB. > > The ones I have won't fit. They are for connecting to pins, not a > connector like the HC1 has. What do I get? Plus what are the > pin-outs? I really need to get a schematic for this... > > Case cover. > > For some strange reason, I thought it would come with a cover. I see > now, that if you stack them you only need one cover, so it is most > likely a separate order. The unit came with a small bag with 2 > screws, but I cannot find any holes in the case for any screws! Strange. > > So after I get at least the power supply and UART to USB for console, > I will be asking how to get this to boot completely from the HD like I > do with my Cubies! > > thanks > > Bob > > > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev