Am 2018-10-22 19:01, schrieb Mark Verlinde: > -----Oorspronkelijk bericht----- >> Afzender:Mark Verlinde <mark at havak.nl> >> Verstuurd: Maandag 22 Oktober 2018 14:27 >> Aan: Conversations around CentOS on ARM hardware <arm-dev at centos.org> >> Onderwerp: Re: [Arm-dev] Community kernel 4.18.x > >> >> Thank you for the hints, it Led to a booting setup! >> >> Still need to fine tine, some customization may not be needed >> howerever this configuration led to the booting odroid HC1. >> >> Appended cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 to the >> cmdline: >> >> # cat /boot/extlinux/extlinux.conf >> # extlinux.conf generated by appliance-creator >> ui menu.c32 >> menu autoboot Welcome to Centos-Uboot-Community-kernel. Automatic boot >> in # second{,s}. Press a key for options. >> menu title Centos-Uboot-Community-kernel Boot Options. >> menu hidden >> timeout 20 >> totaltimeout 600 >> >> default=Centos-Uboot-Community-kernel (4.18.14-200.el7.armv7hl) >> label CentOS Linux (4.18.16-200.el7.armv7hl) 7 (AltArch) >> kernel /vmlinuz-4.18.16-200.el7.armv7hl >> append cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 ro >> root=UUID=a306d630-4957-4da0-8dd6-79f943147d61 LANG=en_US.UTF-8 >> fdtdir /dtb-4.18.16-200.el7.armv7hl >> initrd /initramfs-4.18.16-200.el7.armv7hl.img >> >> label Centos-Uboot-Community-kernel (4.18.14-200.el7.armv7hl) >> kernel /vmlinuz-4.18.14-200.el7.armv7hl >> append cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 ro >> root=UUID=a306d630-4957-4da0-8dd6-79f943147d61 >> fdtdir /dtb-4.18.14-200.el7.armv7hl >> initrd /initramfs-4.18.14-200.el7.armv7hl.img >> >> In an effort to mimic the FC28 intenramfs added/omitted some modules >> and >> added _all_ exynos and samsung divers loaded by the booting FC28 >> setup: >> >> #cat /etc/dracut.conf.d/odroid_hc1.conf >> add_dracutmodules+="dm" >> omit_dracutmodules+="network ifcfg" >> add_drivers+="exynosdrm exynos_bus exynos_trng exynos_nocp exynos_rng >> phy_exynos_dp_video phy_exynos_mipi_video dwc3_exynos clk_exynos_audss >> i2c_exynos5 dw_mmc_exynos dw_mmc_pltfm dw_mmc phy_exynos_usb2 >> phy_exynos5_usbdrd pwm_samsung " >> >> (AGAIN) NOTE: some may be necessary others may be ommited.. > > Turns out one additional driver - dwc3 - is needed to boot the odroid > HC1 with a rootfs residing on a SATA device. > My best guess is dwc3_exynos actually depends on dwc3 and/or (one of) > the dependencies of dwc3. > > > #cat /etc/dracut.conf.d/odroid_hc1.conf > add_dracutmodules+="dm" > omit_dracutmodules+="network ifcfg" > add_drivers+=" exynosdrm exynos_bus exynos_trng exynos_nocp exynos_rng > phy_exynos_dp_video phy_exynos_mipi_video dwc3_exynos clk_exynos_audss > i2c_exynos5 dw_mmc_exynos dw_mmc_pltfm dw_mmc phy_exynos_usb2 > phy_exynos5_usbdrd pwm_samsung " > add_drivers+=" dwc3" > Mark: how do you get CentOS with this actual kernel on the Odroid HC1 ? I've 2 of them running Fedora as a Mailserver and Nextcloudserver. Greetings Andreas