[Arm-dev] yum update failed

Sun Mar 3 11:55:30 UTC 2019
Robert Moskowitz <rgm at htt-consult.com>

That worked,

Thanks

Robert

On 3/3/19 6:21 AM, Pablo Sebastián Greco wrote:
> Robert, try yum install xorg-x11-drv-vmmouse, it should work.
>
> This is related to a problem we had with that driver a long time ago, 
> and now we're trying to fix with a more correct approach.
>
> Pablo.
>
> El 3/3/19 a las 01:13, Robert Moskowitz escribió:
>> new build on a Cubieboard 2.
>>
>> I used
>>
>> https://armv7.dev.centos.org/repos/images/CentOS-Userland-7-armv7hl-generic-Minimal-1810-sda.raw.xz 
>>
>>
>> with
>>
>> xzcat CentOS-Userland-7-armv7hl-generic-Minimal-1810-sda.raw.xz | 
>> sudo dd of=/dev/sdb status=progress bs=4M
>>
>> onto a sata HD.  The uSD card has uboot only.  Booted fine.
>>
>>
>> First step was to do a yum update and it failed:
>>
>> Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> Importing GPG key 0xF4A80EB5:
>>  Userid     : "CentOS-7 Key (CentOS 7 Official Signing Key) 
>> <security at centos.org>"
>>  Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
>>  Package    : centos-userland-release-7-6.1810.2.el7.centos.armv7hl 
>> (@instCentOS/$releasever)
>>  From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
>> Is this ok [y/N]: y
>> Retrieving key from 
>> file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
>> Importing GPG key 0x62505FE6:
>>  Userid     : "CentOS AltArch SIG - Arm32 
>> (https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32) 
>> <security at centos.org>"
>>  Fingerprint: 4d9e 39f1 499c a21d d289 77f8 cafe f11b 6250 5fe6
>>  Package    : centos-userland-release-7-6.1810.2.el7.centos.armv7hl 
>> (@instCentOS/$releasever)
>>  From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-AltArch-Arm32
>> Is this ok [y/N]: y
>> Running transaction check
>> ERROR with transaction check vs depsolve:
>> xorg-x11-drv-vmmouse >= 14.0.0 is needed by (installed) 
>> kernel-4.14.82-201.el7.armv7hl
>>  You could try running: rpm -Va --nofiles --nodigest
>> Your transaction was saved, rerun it with:
>>  yum load-transaction /tmp/yum_save_tx.2019-03-03.04-01.uUyhcp.yumtx
>> [root at localhost ~]#
>>
>> what do I need to do to get this install updated?
>>
>> thanks
>>
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev