On 15/05/2020 05:33, Sam via Arm-dev wrote: > hi i couldnt find a search tool for the mailing list, so apologies if it > has been already discussed but i cannot find a howtofor the orange pi pc2. > > i see it as a supported device but not sure what i need to do to get it > to boot. > > i used rufus and install OS and tried: > > CentOS-Userland-7-aarch64-generic-Minimal-2003-sda.raw.xz > CentOS-Userland-7-armv7hl-generic-Minimal-2003-sda.raw.xz > CentOS-Userland-7-armv7hl-RootFS-Minimal-2003-sda.raw.xz > > and none of them boot. > > I am assuming i am to load the specific uboot for the said device but > not sure how? https://wiki.centos.org/SpecialInterestGroup/AltArch/armhfp#How_to_Install_CentOS_Userland_armv7hl has all the pointers for the uboot setup after you've used dd to put the image on sd card So as you can see, there are two examples as some boards just need one .bin for uboot and some need two, so it depends on your board, but following the instructions about having the uboot-images-armv7 pkg installed/exploded on disk should give you pointers about your board -- Fabian Arrotin The CentOS Project | https://www.centos.org gpg key: 17F3B7A1 | twitter: @arrfab -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20200515/ee0a8e61/attachment-0005.sig>