[CentOS-de] Bridge Interface Problem
jan vollme
janvoll at yahoo.de
Mi Feb 3 09:28:30 UTC 2010
Hi
wir haben einen Server mit 6 Nic am Start, wobei Nic 2 + 3 als Bridge Br0 laufen sollen.
Wenn ich mir mit tcpdump eth2 und eth3 ansehe, sehe ich jedoch nicht den selben Traffic. Ich bin davon ausgegangen, das der Traffic 1zu1 weitergleitet wird. Wir wollen später über IPtables den Trafic zwischen eth2 und eth3 Filtern (FW/iptables). Anbei meine Config, für den goldenen Tipp wäre ich dankbar.
[root at fil-fra network-scripts]# more ifcfg-*
::::::::::::::
ifcfg-br0
::::::::::::::
DEVICE=br0
TYPE=Bridge
IPADDR=192.168.10.2
NETMASK=255.255.255.0
BROADCAST=192.168.10.255
NETWORK=192.168.10.0
STP=no
IPV6INIT=no
ONBOOT=yes
BOOTPROTO=none
::::::::::::::
ifcfg-eth0
::::::::::::::
# Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
DEVICE=eth0
BOOTPROTO=none
BROADCAST=xx.xx.18.63
HWADDR=00:0E:0C:68:06:F0
IPADDR=xx.xx.18.50
IPV6INIT=no
IPV6_AUTOCONF=no
NETMASK=255.255.255.192
NETWORK=xx.xx.18.0
ONBOOT=yes
GATEWAY=xx.xx.18.1
TYPE=Ethernet
::::::::::::::
ifcfg-eth1
::::::::::::::
# Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
DEVICE=eth1
HWADDR=00:0E:0C:68:06:F1
ONBOOT=no
BOOTPROTO=dhcp
TYPE=Ethernet
::::::::::::::
ifcfg-eth2
::::::::::::::
# Intel Corporation 82546GB Gigabit Ethernet Controller (Copper)
DEVICE=eth2
HWADDR=00:1B:21:52:0F:78
ONBOOT=yes
BRIDGE=br0
::::::::::::::
ifcfg-eth3
::::::::::::::
# Intel Corporation 82546GB Gigabit Ethernet Controller (Copper)
DEVICE=eth3
HWADDR=00:1B:21:52:0F:79
ONBOOT=yes
BRIDGE=br0
::::::::::::::
ifcfg-eth4
::::::::::::::
# Intel Corporation 82546GB Gigabit Ethernet Controller (Copper)
DEVICE=eth4
HWADDR=00:1B:21:52:0F:7A
TYPE=ETHER
#BRIDGE=br1
ONBOOT=yes
BOOTPROTO=dhcp
::::::::::::::
ifcfg-eth5
::::::::::::::
# Intel Corporation 82546GB Gigabit Ethernet Controller (Copper)
DEVICE=eth5
HWADDR=00:1B:21:52:0F:7B
TYPE=ETHER
#BRIDGE=br1
ONBOOT=yes
BOOTPROTO=dhcp
::::::::::::::
ifcfg-lo
::::::::::::::
DEVICE=lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
# If you're having problems with gated making 127.0.0.0/8 a martian,
# you can change this to something else (255.255.255.255, for example)
BROADCAST=127.255.255.255
ONBOOT=yes
NAME=loopback
[root at fil-fra network-scripts]#uname -a
Linux fil-fra 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686 i386 GNU/Linux[root at fil-fra network-scripts]#brctl show
bridge name bridge id STP enabled interfaces
br0 8000.001b21520f78 no eth3
eth2
[root at fil-fra network-scripts]#[root at rtp-filter-frankfurt network-scripts]# ifconfig -a
br0 Link encap:Ethernet HWaddr 00:1B:21:52:0F:78
inet addr:192.168.10.2 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:fe52:f78/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8454 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:413866 (404.1 KiB) TX bytes:8500 (8.3 KiB)
eth0 Link encap:Ethernet HWaddr 00:0E:0C:68:06:F0
inet addr:xx.xx.18.50 Bcast:xx.xx.18.63 Mask:255.255.255.192
inet6 addr: fe80::20e:cff:fe68:6f0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:42052 errors:0 dropped:0 overruns:0 frame:0
TX packets:47260 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:5850469 (5.5 MiB) TX bytes:28105052 (26.8 MiB)
Base address:0x3040 Memory:fe8c0000-fe8e0000
...
eth2 Link encap:Ethernet HWaddr 00:1B:21:52:0F:78
inet6 addr: fe80::21b:21ff:fe52:f78/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:361408 errors:0 dropped:0 overruns:0 frame:0
TX packets:204 errors:0 dropped:0 overruns:0 carrier:0
collisions:1 txqueuelen:100
RX bytes:41240902 (39.3 MiB) TX bytes:54453 (53.1 KiB)
Memory:fe780000-fe7a0000
eth3 Link encap:Ethernet HWaddr 00:1B:21:52:0F:79
inet6 addr: fe80::21b:21ff:fe52:f79/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:196596 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:12424750 (11.8 MiB)
Memory:fe7a0000-fe7c0000
...
lg Jan
__________________________________________________
Do You Yahoo!?
Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen Massenmails.
http://mail.yahoo.com
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: http://lists.centos.org/pipermail/centos-de/attachments/20100203/2da8e64f/attachment.html