[CentOS-de] CRRCSIM

[Wolfgang]

> Hallo,
> 
> 
> gibt es ein CentOS-User bei dem die:
> 
> http://crrcsim.berlios.de/wiki/index.php?n=CRRCsim.HomePage
> 
> ohne ruckeln läuft?



> Yup loift!
> 
> Gruß  Timo

Hallo Timo,

welche Hardware setzt Du ein?

Meine Hardware:

# lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller
(rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI
Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary
PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500
GT] (rev a1)
04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller (rev 02)



Cpu(s):  1.4%us,  0.2%sy,  0.0%ni, 98.4%id,  0.0%wa,  0.0%hi,  0.0%si,
0.0%st
Mem:   4150944k total,   669164k used,  3481780k free,    24468k buffers
Swap:  4200988k total,        0k used,  4200988k free,   353592k cached


processor       : 0-3 ( 4Kerne )
vendor_id       : GenuineIntel
cpu family      : 6
model           : 23
model name      : 06/17
stepping        : 10
cpu MHz         : 2833.137
cache size      : 6144 KB
physical id     : 0
siblings        : 4
core id         : 1
cpu cores       : 4
apicid          : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc pni tm2 ssse3 lahf_lm
bogomips        : 5665.97


# uname -a
Linux quad.schule.local 2.6.18-194.32.1.el5PAE #1 SMP Wed Jan 5 18:43:13
EST 2011 i686 i686 i386 GNU/Linux


Evtl. liegt es daran, daß ich kein Grafiktreiber installiert habe?
(früher musste man noch den Nvidia-Treiber im Runlevel 3 installieren)

# Xorg configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "de"
        Option      "XkbVariant" "nodeadkeys"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nv"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection


Hast Du evtl. ein fertiges RPM-Packet für mich, weil ich evtl.
die Kompilierung falsch durchgeführt habe?


Danke schon mal und Gruss
Wolfgang