[CentOS-de] Video-Driver für EeePC 1201HA
Wolfgang
centos at arcor.de
Mi Feb 29 06:42:20 EST 2012
Hallo,
bevor ich mein "grossen" PC auf 6.2 umrüste, wollte ich erstmal mein
Netbook EeePC auf 6.2 bewegen.
Zur Netbookinstallation:
Die Installation wurde mit PXE (runlevel 5) getätigt und ist nicht
aufregend. Während der Installation wurde gleich nach Updates gesehen
und installiert.
Während des Firstboot stürzt das Netbook, nachdem Aufruf udev, ab.
Nachdem der Sound im Bios deaktiviert wurde, konnte die Installation
komplett wiederholt werden und ein Firstboot lief auch durch.
Der Sound wurde bisher auch nicht wieder aktiviert, weil ich erstmal
die richtige VGA-Auflösung bevorzuge.
Nach der Installation erhlte ich die VGA-Auflösung 1024x768, wobei
das Netboot die Auflösung von 1300 und Windows 7 darstellen kann.
# lspci -vv | grep "VGA"
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
00:02.0 VGA compatible controller: Intel Corporation System Controller
Hub (SCH Poulsbo) Graphics Controller (rev 07) (prog-if 00 [VGA
controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx+
pcilib: sysfs_read_vpd: read failed: Connection timed out
# yum info xorg*intel
Installed Packages
Name : xorg-x11-drv-intel
Arch : i686
Version : 2.16.0
Release : 1.el6
Size : 765 k
Repo : installed
>From repo : anaconda-CentOS-201112130233.i386
Summary : Xorg X11 Intel video driver
URL : http://www.x.org
License : MIT
Description : X.Org X11 Intel video driver.
# lsmod
Module Size Used by
fuse 55994 2
autofs4 20825 3
cpufreq_ondemand 8512 2
acpi_cpufreq 6858 1
mperf 1253 1 acpi_cpufreq
ipt_REJECT 1931 2
nf_conntrack_ipv4 7694 4
nf_defrag_ipv4 1039 1 nf_conntrack_ipv4
iptable_filter 2173 1
ip_tables 9567 1 iptable_filter
ip6t_REJECT 3987 2
nf_conntrack_ipv6 7207 2
nf_defrag_ipv6 9873 1 nf_conntrack_ipv6
xt_state 1064 6
nf_conntrack 65524 3
nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
ip6table_filter 2245 1
ip6_tables 10867 1 ip6table_filter
ipv6 264641 35
ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6
uinput 6244 0
microcode 12152 0
arc4 1151 2
ecb 1613 2
ath9k 266946 0
mac80211 130488 1 ath9k
ath 7545 1 ath9k
cfg80211 117703 3 ath9k,mac80211,ath
rfkill 15242 1 cfg80211
sg 24612 0
atl1c 28676 0
uvcvideo 55188 0
videodev 65378 1 uvcvideo
i2c_isch 6742 0
i2c_core 25825 2 videodev,i2c_isch
ext4 331566 3
mbcache 5976 1 ext4
jbd2 73586 1 ext4
sd_mod 35435 5
crc_t10dif 1217 1 sd_mod
pata_acpi 2513 0
ata_generic 2805 0
pata_sch 1961 4
video 16720 0
output 1805 1 video
dm_mirror 11678 0
dm_region_hash 9737 1 dm_mirror
dm_log 8546 2 dm_mirror,dm_region_hash
dm_mod 67661 2 dm_mirror,dm_log
Irgendwie sieht es so aus als wäre kein Inteldriver geladen.?
Früher (Fedora 14) hat der Treiber den Namen xorg*psb*.
# yum info --enablerepo=rpmf* *psb*
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: ftp-stud.fht-esslingen.de
* epel: ftp.linux.cz
* epel-source: ftp.linux.cz
* epel-testing: ftp.linux.cz
* epel-testing-source: ftp.linux.cz
* extras: ftp-stud.fht-esslingen.de
* rpmforge: ftp-stud.fht-esslingen.de
* rpmforge-extras: ftp-stud.fht-esslingen.de
* rpmforge-testing: ftp-stud.fht-esslingen.de
* rpmfusion-free-updates: ftp-stud.hs-esslingen.de
* rpmfusion-free-updates-debuginfo: ftp-stud.hs-esslingen.de
* rpmfusion-free-updates-source: ftp-stud.hs-esslingen.de
* rpmfusion-free-updates-testing: ftp-stud.hs-esslingen.de
* rpmfusion-free-updates-testing-debuginfo: ftp-stud.hs-esslingen.de
* rpmfusion-free-updates-testing-source: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates-debuginfo: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates-source: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates-testing: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates-testing-debuginfo: ftp-stud.hs-esslingen.de
* rpmfusion-nonfree-updates-testing-source: ftp-stud.hs-esslingen.de
* updates: ftp-stud.fht-esslingen.de
Error: No matching Packages to list
Tja, das war früher.
Wer kann hier weiterhelfen?
Grüsse
Wolfgang