http://www.morganstanley.com/institutional/techresearch/pdfs/GSB112005.pdf HP Proliant ML110 G3 SCSI Model, it has 2 SATA conectors onboard, but BIOS Setup has it disable and do not allow to switch to enable. Of course I have attached an 80GB Segate SATA Drive. HP specification say that this kind of Proliant model allow to employ SCSI or SATA hdd, but SCSI came with a SCSI card in a PCI-X slot and those SATA conectors onboard have to be wired to Motherboard's SATA controler, but BIOS Setup has bloqued it. Is any thing that we can do under CentOS 4.2 to enable and use SATA HDD avoiding this HP restriction ? ___________________________________ Orlando Rubino Gala Administración UONet Email = rubino at eco.uo.edu.cu Email = orlando_rubino at yahoo.com Fax = 1(360) 351 - 0681 Phone = 632138 ____________________________________