Hi, there. is this letter meet the purpose of your list. I meet a problem on installing CentOS4.4 ServerCD. I want to use HP Embedded SATA RAID controller. But CentOS does not support this controller driver. And HP too. I searched so many site on the internet. Finally, I found some information, jakie wrote on www.centos.org topic -> http://www.centos.org/modules/newbb/viewtopic.php?topic_id=5695&forum=29&post_id=17049 I did same way he wrote (1) Connect USB FlashDisk on USB. this has SATA RAID driver for REDHAT 4. named... "adpahci-1.2.5571-1.rhel4.x86_64.dd". (2) Boot from CentOS ServerCD 4.4 x86-64bit. (3) linux dd: ------------> install.......... (4) I can see Single Disk. (5) Install.... My system is : OS : CentOS 4.4 Server CD HP DL320G5 3050 HDD : 2*80GB Seagate SATA II HDD RAID : HP Embedded SATA RAID Controller. All process is clear. And there is no error msg. But reboot after install finished, there are some error messages..... some partition mount failed. "/usr", "/sys" are failed to mount but "/boot", "/", "/tmp", "var" and most partitions are mounted. Prompt appear, I enter on the system. there is no files in "/usr" directory. So, I can't use "yum", "rpm", "up2date" and so on. Is this ServerCD's problem? And How can I solve this problem ? Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-devel/attachments/20080416/ef4ca84c/attachment-0007.html>