Hi all, I have read that you search for some kickstart in order to test CentOS deployments. I send you one like we use in our environment. We use it for Xen Dom0 cluster connected to ISCSI SAN. I hope this helps. Regards. ############################################################################## # # # Kickstart file for LAN cluster node. # # # ############################################################################## # # Install type ############################################################################### install cdrom text firstboot --disabled reboot # # Locale, timezone and keymap ############################################################################### lang fr_FR.UTF-8 keyboard fr-latin9 timezone --utc Europe/Paris # # Network configuration ############################################################################### ### Bond1 # Admin and VMs network interface available on "public" cluster network (bonding) network --device eth0 --onboot yes --bootproto static --ip 192.168.2.99 --netmask 255.255.255.240 --gateway 192.168.2.106 --nameserver 192.168.1.10 --hostname sirislanxen1.exemple.com network --device eth5 --onboot yes --bootproto static --ip 192.168.2.99 --netmask 255.255.255.240 --gateway 192.168.2.106 --nameserver 192.168.1.10 --hostname sirislanxen1.exemple.com ### End Bond1 ### ISCSI # SAN interfaces network --device eth1 --onboot yes --bootproto static --ip 10.1.1.51 --mtu 9000 --netmask 255.255.255.0 --hostname node1.exemple.com network --device eth2 --onboot yes --bootproto static --ip 10.1.1.52 --mtu 9000 --netmask 255.255.255.0 --hostname node1.exemple.com ### End ISCSI ### Bond0 # Cluster management interfaces (bonding) network --device eth3 --onboot yes --bootproto static --ip 10.1.0.2 --netmask 255.255.255.0 --hostname node1.exemple.com network --device eth4 --onboot yes --bootproto static --ip 10.1.0.2 --netmask 255.255.255.0 --hostname node1.exemple.com ### End bond0 # # Firewall, SELinux, services and security configuration ############################################################################### # default root password : 'foo11bar' rootpw --iscrypted $1$L.LWW5FI$kGSjEOyma9dWQA0NV/9aK1 firewall --disabled services --disabled cups,iptables,ip6tables,kudzu,netfs,xendomains,avahi-daemon,acpid services --enabled multipathd authconfig --enableshadow --enablemd5 selinux --permissive # # Disk and partition configuration ############################################################################### bootloader --location=mbr --driveorder=sda clearpart --all part /boot --fstype ext3 --size=100 part pv.5 --size=100 --grow volgroup VolGroupXen1 --pesize=32768 pv.5 logvol / --fstype ext3 --name=LogVolRoot --vgname=VolGroupXen1 --size=6000 logvol /var --fstype ext3 --name=LogVolVar --vgname=VolGroupXen1 --size=2048 logvol swap --fstype swap --name=LogVolSwap --vgname=VolGroupXen1 --size=2048 logvol /tmp --fstype ext3 --name=LogVolTmp --vgname=VolGroupXen1 --size=2048 # # Common packages for all cluster nodes ############################################################################### %packages @editors @text-internet @virtualization @core @base @network-server @clustering @french-support iscsi-initiator-utils bridge-utils device-mapper-multipath vnc-server OpenIPMI OpenIPMI-tools #yum-allowdowngrade #yum-priorities yum-security ntp luci -cadaver -gnome-applet-vm -words -coolkey -nano -autofs -pcmciautils -mtools -NetworkManager -nfs-utils -mkbootdisk -irda-utils -amtu -ypbind -smartmontools -ccid -anacron -bluez-utils -talk -system-config-cluster -ipvsadm -piranha -firstboot-tui -firstboot # # Post install script ############################################################################### %post # # Bonding configuration # ### Modprobe # Modify the modprobe.conf file echo "alias bnx2i off" >> /etc/modprobe.conf echo "alias bond0 bonding" >> /etc/modprobe.conf echo "alias bond1 bonding" >> /etc/modprobe.conf echo "options bond0 miimon=80 mode=1 primary=eth4" >> /etc/modprobe.conf echo "options bond1 miimon=80 mode=1 primary=eth0" >> /etc/modprobe.conf ### End Modprobe ### Bond0 # Create network interface config file for bond0 echo -e DEVICE=bond0\\nIPADDR=10.1.0.2\\nNETMASK=255.255.255.0\\nONBOOT=yes\\nBOOTPROTO=static\\nUSERCTL=no > /etc/sysconfig/network-scripts/ifcfg-bond0 ### End Bond0 ### Bond1 # Create network interface config file for bond1 echo -e DEVICE=bond1\\nIPADDR=192.168.2.99\\nNETMASK=255.255.255.240\\nONBOOT=yes\\nBOOTPROTO=static\\nUSERCTL=no > /etc/sysconfig/network-scripts/ifcfg-bond1 ### End Bond1 ### MTU # Add MTU configuration for ISCSI echo "MTU=9000" >> /etc/sysconfig/network-scripts/ifcfg-eth1 echo "MTU=9000" >> /etc/sysconfig/network-scripts/ifcfg-eth2 ### End MTU ### Bond0 IFACEs # Modifiy slaves network interfaces config files for bond0 (eth3, eth4) sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth3 echo -e SLAVE=yes\\nMASTER=bond0 >> /etc/sysconfig/network-scripts/ifcfg-eth3 sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth4 echo -e SLAVE=yes\\nMASTER=bond0 >> /etc/sysconfig/network-scripts/ifcfg-eth4 ### End Bond0 IFACEs ### Bond1 IFACEs # Modifiy slaves network interfaces config files for bond1 (eth0, eth5) sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth0 echo -e SLAVE=yes\\nMASTER=bond1 >> /etc/sysconfig/network-scripts/ifcfg-eth0 sed -i -e '/^IPADDR=*/ s/^/#/' -e '/^NETMASK=*/ s/^/#/' -e '/^NETWORK=*/ s/^/#/' -e '/^DHCPCLASS=*/ s/^/#/' /etc/sysconfig/network-scripts/ifcfg-eth5 echo -e SLAVE=yes\\nMASTER=bond1 >> /etc/sysconfig/network-scripts/ifcfg-eth5 ### End Bond1 IFACEs # # VLAN configuration for VMs # #### VLAN 12 echo -e DEVICE=bond1.12\\nBRIDGE=vlanbr0\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.12 echo -e DEVICE=vlanbr0\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr0 ### End VLAN 12 ### VLAN 10 echo -e DEVICE=bond1.10\\nBRIDGE=vlanbr1\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.10 echo -e DEVICE=vlanbr1\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr1 ### End VLAN 10 ### VLAN 17 echo -e DEVICE=bond1.17\\nBRIDGE=vlanbr2\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.17 echo -e DEVICE=vlanbr2\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr2 ### End VLAN 17 ### VLAN 11 echo -e DEVICE=bond1.11\\nBRIDGE=vlanbr3\\nONBOOT=yes\\nBOOTPROTO=static\\nVLAN=yes > /etc/sysconfig/network-scripts/ifcfg-bond0.11 echo -e DEVICE=vlanbr3\\nTYPE=bridge\\nONBOOT=yes\\nBOOTPROTO=static\\nSTP=off\\nDELAY=0 > /etc/sysconfig/network-scripts/ifcfg-vlanbr3 ### End VLAN 11 # # Xen configuration # # Modify xen config file to set right params for network and min memory amount for xen sed -i -e '/(network-script network-bridge)/a (network-script /bin/true)' -e '/(dom0-min-mem 256)/a (dom0-min-mem 1024)' -e '/(network-script network-bridge)/ s/^/#/' -e '/(dom0-min-mem 256)/ s/^/#/' /etc/xen/xend-config.sxp # Configure xen migration sed -i -e '/#(xend-relocation-server no)/a (xend-relocation-server yes)' -e '/#(xend-relocation-port 8002)/a (xend-relocation-port 8002)' /etc/xen/xend-config.sxp sed -i -e "/#(xend-relocation-address '')/a (xend-relocation-address '10.1.0.2')" -e '/^(xend-relocation-hosts-allow*/ s/^/#/' -e "//a (xend-relocation-hosts-allow '')" /etc/xen/xend-config.sxp ### Hosts configuration sed -i -e '/^127.0.0.1/a 127.0.0.1\tlocalhost.localdomain localhost ' -e '/^127.0.0.1/D' /etc/hosts echo 10.1.0.2 node1.exemple.com node1 >> /etc/hosts echo 10.1.0.4 node2.exemple.com node2 >> /etc/hosts echo 10.1.0.6 node3.exemple.com node3 >> /etc/hosts echo 10.1.0.8 node4.exemple.com node4 >> /etc/hosts ### End Host configuration # # EOF #####