-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Aug 27 14:33, Johnny Hughes wrote: > We have a need to be able to generate embargoed content for SIGs. As an > example, Xen publishes embargoed content where we need to apply patches, > build an SRPM and then binary RPMs. > > We can not do this in an open build system as the content must be > embargoed until after the release date. > > What I think we need is password protected input and builds in the CBS > and password protected repos for the resultant RPMs. We could then > control access to those specific locations via login. > > Does the current version of koji support that? Koji doesn't support "hiding" builds, so we can probably do what you suggested below. (I believe embargo builds were kicked around as a feature in the Koji v2 discussion) > > If not, we could create an embargoed build area(s) in the current CentOS > build system, where the output of the build system is not transferred to > buildlogs.centos.org .. but I would also need to point to the proper > repos in the CBS as well. > > Who, besides the Xen rpms in the virt SIG might need this embargoed > build capability? > > Thanks, > Johnny Hughes > - --Brian -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBAgAGBQJV326MAAoJEIMGvNKzCweMf7kP/0uiQqPs7Zqxogtn9JZwOrVj dZ7LA/IZreGam4pzcuDXFzZnDenG+zoQFEcCSB1eUaWbgh0vcicPdYmhD1LhhYUW 1tXi+xfurxiIkfIUgIvKZqKOJxm8s2QZbLk+I1R9x4A7s3dtCI9eZ4KVsNkryqe/ 6RA6c5dpDeVqnRl3K5NKet15zZ94q6KxSzR1cI1t7qcscc6eQbcWeEKakm02pdcr 5645xLmexl+zIVo0e9gFzJxtmkPf+pBqDIBEvlLCPQ1R3EibyJXkTonFCfDXtP8k 9+l0lNWauFF8weKNzbgQ8uHaYwecXn3LdyId/S6DP3N9eNxhv1gNuA9nOAQWkwGY RlossYPOAX2Ap1gZHu2ZE2f4vbCs7xMPgDVFOY/6LncGo4Ao4f/8jib+K3crWhcT Lgj76hrVNcS2D/RyQnyC5Ya4fS0pnY1XnPW0I0wC+3qhYSVNFvbJC/RkPdWKiztT kEkPWkVNNNA22MIH1PYAoHTQzwdmM/xCE8jLO6Yp1s0e1Nr+3sVbI9qafUGXHJu6 INpLVZrbq1qSsxru8jZ1rPFnQKypf52cTffoEgzZWXnJiYHQk+cbw+qdsYuG9/w7 luIFbHu5808jWeqIAK2AXQCAOomBTzmcXlePfhiDyt0G0jN3IcgAW98CFs86z/mA aS98Gj8b5kJUb4oUQK4n =8/Qb -----END PGP SIGNATURE-----