[CentOS-docs] Suggestions on "I Need the Kernel Source" Wiki pages

[Antti J. Huhtala]

ma, 2008-07-14 kello 06:07 -0700, Akemi Yagi kirjoitti:
> On Mon, Jul 14, 2008 at 5:58 AM, Antti J. Huhtala <ahuhtal4 at welho.com> wrote:
> > ma, 2008-07-14 kello 12:20 +0100, Alan Bartlett kirjoitti:
> 
> > Now I'm testing your "I Need to Build a Custom Kernel" HowTo. Everything
> > seems to be OK in the HowTo, even if the final build fails with an error
> > "Makefile:405: /home/andie/rpmbuild/BUILD/kernel-2.6.18/\
> > linux-2.6.18.i686/arch//Makefile: No such file or directory".
> 
> This is most likely because you missed the step of adding the # i386
> (or #x86_64) line.  Could you check this out?
> 
> Akemi

You are exactly right, Akemi, thanks. I did not add it to the
original .config because it was there already. However, after copying
the file back and forth a couple of times it seems to be missing now. So
it must be added there just before final "rpmbuild -bb ..." command? 
The "#i386" line is still in .config.old but that probably isn't very
helpful at all...
I'll try again later this evening. Thanks again!

Antti