On 09/28/2015 06:17 PM, Scott Dowdle wrote: > Greetings, > > I have a couple of ProLiant G5 systems and I just built my own remix that includes the elrepo provided cciss driver... but hey, I'd like to use stock media and the info you provided if possible. The only thing is I don't remember what card is in the system as it has been a while since I originally set it up. I guess I could probably reboot it and pay very close attention to the POST info and maybe that'd tell me. > > lspci only lists it as: > 06:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 03) > > lshw lists it as: > *-storage > > How do I tell what make and model of RAID card it is? > > TYL, > I neglected to note that in my original mail. My systems are the same as yours. As you can see, I'm using the native HPSA driver in mine. [root at node2 ~]# lspci | grep -i rai 06:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller (rev 03) [root at node2 ~]# lshw -class disk -class storage *-storage description: RAID bus controller product: Smart Array Controller vendor: Hewlett-Packard Company physical id: 0 bus info: pci at 0000:06:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: storage pciexpress msix pm vpd bus_master cap_list rom configuration: driver=hpsa latency=0 resources: irq:18 memory:fdd00000-fddfffff ioport:4000(size=256) memory:fdcf0000-fdcf0fff memory:d0100000-d013ffff -- Dan Mossor, RHCSA Systems Engineer Fedora Server WG | Fedora KDE WG | Fedora QA Team Fedora Infrastructure Apprentice FAS: dmossor IRC: danofsatx San Antonio, Texas, USA