Wanted to report success, following this procedure: https://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom At the bottom, I see something of a compatibility matrix, but a line representing my specific setup does not exists. So I offer the following data to show that it works in my environment. [erik at localhost ~]$ uname -r 3.10.0-327.36.3.el7.x86_64 [erik at localhost ~]$ cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) [erik at localhost ~]$ cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) [erik at localhost ~]$ lspci -nvv ... 0c:00.0 0280: 14e4:4315 (rev 01) Subsystem: 1028:000c Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f1ffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl [erik at localhost ~]$ ls -ld Downloads/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz -rw-rw-r--. 1 erik erik 2928541 Dec 9 21:47 Downloads/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz [erik at localhost ~]$ I also wanted to point out, the command provided to extract the TGZ file downloaded from the Broadcom site is incorrect. Should be: tar xvzf /path/to/the/tarball/hybrid-v35_64-nodebug-pcoem-6_30_223_271.tar.gz The "f" flag should be the last flag in the list. Got an error when entered as provided. Thanks! Erik Schminke -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-docs/attachments/20161209/5b6e4fbf/attachment-0003.html>