[CentOS-es] ayuda para instalar Directory Server en Centos- 5.3 desde una maquina virtual

Jue Nov 19 20:19:42 UTC 2009

bueno Romero esto es lo que sale dentro de ese archivo:

---------------------------------------------------------------------------------
[09/11/18:09:21:20] - [Setup] Info This program will set up the CentOS
Directory and Administration Servers.

It is recommended that you have "root" privilege to set up the software.
Tips for using this program:
  - Press "Enter" to choose the default and go to the next screen
  - Type "Control-B" then "Enter" to go back to the previous screen
  - Type "Control-C" to cancel the setup program

[09/11/18:09:21:20] - [Setup] Info Would you like to continue with set up?
[09/11/18:09:21:21] - [Setup] Info yes
[09/11/18:09:21:21] - [Setup] Info BY SETTING UP AND USING THIS SOFTWARE YOU
ARE CONSENTING TO BE BOUND BY
AND ARE BECOMING A PARTY TO THE AGREEMENT FOUND IN THE
LICENSE.TXT FILE. IF YOU DO NOT AGREE TO ALL OF THE TERMS
OF THIS AGREEMENT, PLEASE DO NOT SET UP OR USE THIS SOFTWARE.

[09/11/18:09:21:21] - [Setup] Info Do you agree to the license terms?
[09/11/18:09:21:23] - [Setup] Info yes
[09/11/18:09:21:23] - [Setup] Info Your system has been scanned for
potential problems, missing patches,
etc.  The following output is a report of the items found that need to
be addressed before running this software in a production
environment.

CentOS Directory Server system tuning analysis version 10-AUGUST-2007.

NOTICE : System is i686-unknown-linux2.6.18-128.el5 (1 processor).

WARNING: 1010MB of physical memory is available on the system. 1024MB is
recommended for best performance on large production system.

NOTICE : The net.ipv4.tcp_keepalive_time is set to 7200000 milliseconds
(120 minutes).  This may cause temporary server congestion from lost
client connections.

WARNING: There are only 1024 file descriptors (hard limit) available, which
limit the number of simultaneous connections.

WARNING: There are only 1024 file descriptors (soft limit) available, which
limit the number of simultaneous connections.

[09/11/18:09:21:23] - [Setup] Info Would you like to continue?
[09/11/18:09:21:24] - [Setup] Info yes
[09/11/18:09:21:24] - [Setup] Info Choose a setup type:

   1. Express
       Allows you to quickly set up the servers using the most
       common options and pre-defined defaults. Useful for quick
       evaluation of the products.

   2. Typical
       Allows you to specify common defaults and options.

   3. Custom
       Allows you to specify more advanced options. This is
       recommended for experienced server administrators only.

To accept the default shown in brackets, press the Enter key.

[09/11/18:09:21:24] - [Setup] Info Choose a setup type
[09/11/18:09:21:25] - [Setup] Info 2
[09/11/18:09:21:25] - [Setup] Info Enter the fully qualified domain name of
the computer
on which you're setting up server software. Using the form
<hostname>.<domainname>
Example: eros.example.com.

To accept the default shown in brackets, press the Enter key.

[09/11/18:09:21:31] - [Setup] Info Computer name
[09/11/18:09:21:33] - [Setup] Info dhcppc4.localdomain
[09/11/18:09:21:33] - [Setup] Info The servers must run as a specific user
in a specific group.
It is strongly recommended that this user should have no privileges
on the computer (i.e. a non-root user).  The setup procedure
will give this user/group some permissions in specific paths/files
to perform server-specific operations.

If you have not yet created a user and group for the servers,
create this user and group using your native operating
system utilities.

[09/11/18:09:21:33] - [Setup] Info System User
[09/11/18:09:21:34] - [Setup] Info nobody
[09/11/18:09:21:34] - [Setup] Info System Group
[09/11/18:09:21:34] - [Setup] Info nobody
[09/11/18:09:21:34] - [Setup] Info Server information is stored in the
configuration directory server.
This information is used by the console and administration server to
configure and manage your servers.  If you have already set up a
configuration directory server, you should register any servers you
set up or create with the configuration server.  To do so, the
following information about the configuration server is required: the
fully qualified host name of the form
<hostname>.<domainname>(e.g. hostname.example.com), the port number
(default 389), the suffix, the DN and password of a user having
permission to write the configuration information, usually the
configuration directory administrator, and if you are using security
(TLS/SSL).  If you are using TLS/SSL, specify the TLS/SSL (LDAPS) port
number (default 636) instead of the regular LDAP port number, and
provide the CA certificate (in PEM/ASCII format).

If you do not yet have a configuration directory server, enter 'No' to
be prompted to set up one.

[09/11/18:09:21:34] - [Setup] Info Do you want to register this software
with an existing
configuration directory server?
[09/11/18:09:21:35] - [Setup] Info no
[09/11/18:09:21:35] - [Setup] Info Please enter the administrator ID for the
configuration directory
server.  This is the ID typically used to log in to the console.  You
will also be prompted for the password.

[09/11/18:09:21:35] - [Setup] Info Configuration directory server
administrator ID
[09/11/18:09:21:36] - [Setup] Info admin
[09/11/18:09:21:36] - [Setup] Info Password
[09/11/18:09:21:39] - [Setup] Info Password (confirm)
[09/11/18:09:21:41] - [Setup] Info The information stored in the
configuration directory server can be
separated into different Administration Domains.  If you are managing
multiple software releases at the same time, or managing information
about multiple domains, you may use the Administration Domain to keep
them separate.

If you are not using administrative domains, press Enter to select the
default.  Otherwise, enter some descriptive, unique name for the
administration domain, such as the name of the organization
responsible for managing the domain.

[09/11/18:09:21:41] - [Setup] Info Administration Domain
[09/11/18:09:21:42] - [Setup] Info localdomain
[09/11/18:09:21:42] - [Setup] Info The standard directory server network
port number is 389.  However, if
you are not logged as the superuser, or port 389 is in use, the
default value will be a random unused port number greater than 1024.
If you want to use port 389, make sure that you are logged in as the
superuser, that port 389 is not in use.

[09/11/18:09:21:42] - [Setup] Info Directory server network port
[09/11/18:09:21:43] - [Setup] Info 389
[09/11/18:09:21:43] - [Setup] Info Each instance of a directory server
requires a unique identifier.
This identifier is used to name the various
instance specific files and directories in the file system,
as well as for other uses as a server instance identifier.

[09/11/18:09:21:43] - [Setup] Info Directory server identifier
[09/11/18:09:21:44] - [Setup] Info dhcppc4
[09/11/18:09:21:44] - [Setup] Warning Error: the server already exists at
'/etc/dirsrv/slapd-dhcppc4'
Please remove it first if you really want to recreate it,
or use a different ServerIdentifier to create another instance.
[09/11/18:09:21:44] - [Setup] Info Directory server identifier
[09/11/18:09:22:24] - [Setup] Info dhcppc4
[09/11/18:09:22:24] - [Setup] Info The suffix is the root of your directory
tree.  The suffix must be a valid DN.
It is recommended that you use the dc=domaincomponent suffix convention.
For example, if your domain is example.com,
you should use dc=example,dc=com for your suffix.
Setup will create this initial suffix for you,
but you may have more than one suffix.
Use the directory server utilities to create additional suffixes.

[09/11/18:09:22:24] - [Setup] Info Suffix
[09/11/18:09:22:26] - [Setup] Info dc=localdomain
[09/11/18:09:22:26] - [Setup] Info Certain directory server operations
require an administrative user.
This user is referred to as the Directory Manager and typically has a
bind Distinguished Name (DN) of cn=Directory Manager.
You will also be prompted for the password for this user.  The password must
be at least 8 characters long, and contain no spaces.
Press Control-B or type the word "back", then Enter to back up and start
over.

[09/11/18:09:22:26] - [Setup] Info Directory Manager DN
[09/11/18:09:22:28] - [Setup] Info cn=Directory Manager
[09/11/18:09:22:28] - [Setup] Info Password
[09/11/18:09:22:32] - [Setup] Info Password (confirm)
[09/11/18:09:22:34] - [Setup] Info The Administration Server is separate
from any of your web or application
servers since it listens to a different port and access to it is
restricted.

Pick a port number between 1024 and 65535 to run your Administration
Server on. You should NOT use a port number which you plan to
run a web or application server on, rather, select a number which you
will remember and which will not be used for anything else.

[09/11/18:09:22:34] - [Setup] Info Administration port
[09/11/18:09:22:35] - [Setup] Info 9830
[09/11/18:09:22:35] - [Setup] Info The interactive phase is complete.  The
script will now set up your
servers.  Enter No or go Back if you want to change something.

[09/11/18:09:22:35] - [Setup] Info Are you ready to set up your servers?
[09/11/18:09:22:36] - [Setup] Info yes
[09/11/18:09:22:36] - [Setup] Info Creating directory server . . .
[09/11/18:09:22:41] - [Setup] Info Your new DS instance 'dhcppc4' was
successfully created.
[09/11/18:09:22:41] - [Setup] Info Creating the configuration directory
server . . .
[09/11/18:09:25:50] - [Setup] Fatal Error: failed to open an LDAP connection
to host 'dhcppc4.localdomain' port '389' as user 'cn=Directory Manager'.
Error: unknown.
[09/11/18:09:25:50] - [Setup] Fatal Failed to create the configuration
directory server
[09/11/18:09:25:50] - [Setup] Fatal Exiting . . .
Log file is '/tmp/setupM3AYo1.log'

--------------------------------------------------------------------------------------------------------------

he traducido lo que esta ahi, segun entiendo es todo lo que yo he
configurado al momento de crear el Directory Server NOSE que mas puedo hacer
parece que es lo mismo que te mostre anteriormente.... bueno no soy tan
experto en el tema.... ojala me puedas ayudar

te cuento que estos pasos los he realizado en una maquina de mi universidad
donde esta istalado verdaderamente el sistema operativo (es decir en el HD),
la version es la 5.2 justo con la que te explica el manual que te mostre....
y al parecer ahi si ha salido todo a la perfeccion como lo muestra tal
tutorial ... eso creo me esta llevando a concluir que es por estar
tarbajando desde una maquina virtual.... no se de que manera me podrias
ayudar .. aunque la cosa es que ahora me han pedido que conecte una terminal
con UBUNTU y otra de WIDNOWS XP a dicho servidor de CENTOS... quisiera que
tambien me ayudaras en esto o recomendarme algun manual de lo que quiero
realizar ...
agradesco todo tus ganas de ponder ayudarme .....

> att MAX MESTANZA CABANILLAS desde PERU

2009/11/19 Renato Covarrubias Romero <rcovarru en alumnos.inf.utfsm.cl>

> El 18/11/09 21:11, Max Denis Mestanza Cabanillas escribió:
> [...]
> > Log file is '/tmp/setupM3AYo1.log'
> [...]
>
> ¿ Y que dice el archivo /tmp/setupM3AYo1.log ?
>
> --
> Renato Covarrubias Romero                   counter.li.org  #399677
> rcovarru [at] alumnos.inf.utfsm.cl          http://rnt.cl
> Estudiante Ingenieria Civil Informatica, Casa Central, UTFSM.
>
>
>
> _______________________________________________
> CentOS-es mailing list
> CentOS-es en centos.org
> http://lists.centos.org/mailman/listinfo/centos-es
>
>

-- 
------------------------
att. Max Mestanza Cabanillas
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: http://lists.centos.org/pipermail/centos-es/attachments/20091119/c5705a4e/attachment-0001.html 