[CentOS-es] Problemas Impresora HP
Sergio Rebich
sr en rcom.com.ar
Lun Feb 6 08:38:08 EST 2012
Julio desde ya muchas gracias por la respuesta. Disculpa la demora en
responder mis findes me retraigo a mi aldea y alla la interne no llega
jeje. Hice lo que vos me pasaste y continue teniendo el mismo problema. Lo
solucione instalando los drivers foo2zjs (http://foo2zjs.rkkda.com/). Ya
esta funcionando por suerte.
Saludos
2012/2/5 Julio Martinez <hulyom en yahoo.com>
> Hola Sergio,
> Si no tienes instalado aún, estos son los paqutes que deberías instalar
> para que una HP te corra en CentOS
> hplip
> hplip-common
> hplip-gui
> hplip-libs
>
> Si quieres que tu Ubuntu pueda utlizarlo también tienes que instalar estos
> paquetes.
>
> Saludos
> Julio
>
> --- On Thu, 2/2/12, Sergio Rebich <sr en rcom.com.ar> wrote:
>
> From: Sergio Rebich <sr en rcom.com.ar>
> Subject: [CentOS-es] Problemas Impresora HP
> To: centos-es en centos.org
> Date: Thursday, 2 February, 2012, 18:21
>
> Buenas tardes gente, esta es mi primer consulta, pido disculpa sino cumplo
> con algun requisito. Tengo una consulta para hacer, estoy intentando
> agregar una impresora HP LaserJet P1505 en un Servidor Centos 5.7 para
> compartirla con el resto de la red, la misma esta instalada e imprimiendo
> localmente en un puesto de trabajo con Ubuntu. El error que da es
> *"/usr/lib/cups/filter/foomatic-rip-hplip
> failed". *Alguno tubo el mismo problema?
> Aclaro que al instalar el python-dbus me dice: que ya esta actualizado y en
> su ultima version.
>
> Aca les paso los resultados del hp-check. Gracias por todo y disculpa por
> las molestias,
>
>
> -------------------------------------------------------------------------------------------------------------------------------------------------------------
> warning: python-dbus not installed.
>
> HP Linux Imaging and Printing System (ver. 3.11.12)
> Dependency/Version Check Utility ver. 14.3
>
> Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
> Note: hp-check can be run in three modes:
> 1. Compile-time check mode (-c or --compile): Use this mode before
> compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
> proper
> dependencies are installed to successfully compile
> HPLIP.
>
> 2. Run-time check mode (-r or --run): Use this mode to determine if a
> distro supplied package (.deb, .rpm, etc) or an already built HPLIP
> supplied tarball
> has the proper dependencies installed to successfully
> run.
>
> 3. Both compile- and run-time check mode (-b or --both) (Default): This
> mode will check both of the above cases (both compile- and run-time
> dependencies).
>
> Saving output in log file: hp-check.log
>
> Initializing. Please wait...
> -debug1: client_input_channel_open: ctype x11 rchan 3 win 65536 max 16384
> debug1: client_request_x11: request from 192.168.84.200 54402
> debug1: channel 1: new [x11]
> debug1: confirm x11
> |debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
> debug1: client_request_x11: request from 192.168.84.200 54403
> debug1: channel 2: new [x11]
> debug1: confirm x11
> debug1: channel 2: FORCE input drain
> debug1: channel 2: free: x11, nchannels 3
>
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux gride2 2.6.18-274.17.1.el5.centos.plus #1 SMP Wed Jan 11 10:58:19 EST
> 2012 i686 i686 i386 GNU/Linux
>
> Distribution:
> centos 5.7
>
> Checking Python version...
> OK, version 2.4.3 installed
>
> Checking PyQt 4.x version...
> error: NOT FOUND OR FAILED TO LOAD!
>
> Checking for CUPS...
> Status: el programa de planificación de tareas se está ejecutando
> Version: 1.3.7
> error_log is set to level: info
>
> Checking for dbus/python-dbus...
> dbus daemon is running.
> python-dbus version: 0.70.0
>
>
> ------------------------------------
> | COMPILE AND RUNTIME DEPENDENCIES |
> ------------------------------------
>
> note: To check for compile-time only dependencies, re-run hp-check with the
> -c parameter (ie, hp-check -c).
> note: To check for run-time only dependencies, re-run hp-check with the -r
> parameter (ie, hp-check -r).
>
> Checking for dependency: CUPS - Common Unix Printing System...
> OK, found.
>
> Checking for dependency: CUPS DDK - CUPS driver development kit...
> warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
> functionality may not function properly.
>
> Checking for dependency: CUPS devel- Common Unix Printing System
> development files...
> OK, found.
>
> Checking for dependency: CUPS image - CUPS image development files...
> OK, found.
>
> Checking for dependency: DBus - Message bus system...
> OK, found.
>
> Checking for dependency: gcc - GNU Project C and C++ Compiler...
> OK, found.
>
> Checking for dependency: GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency: libcrypto - OpenSSL cryptographic library...
> OK, found.
>
> Checking for dependency: libjpeg - JPEG library...
> OK, found.
>
> Checking for dependency: libnetsnmp-devel - SNMP networking library
> development files...
> OK, found.
>
> Checking for dependency: libpthread - POSIX threads library...
> OK, found.
>
> Checking for dependency: libtool - Library building support services...
> OK, found.
>
> Checking for dependency: libusb - USB library...
> OK, found.
>
> Checking for dependency: make - GNU make utility to maintain groups of
> programs...
> OK, found.
>
> Checking for dependency: PIL - Python Imaging Library (required for
> commandline scanning with hp-scan)...
> OK, found.
>
> Checking for dependency: PolicyKit - Administrative policy framework...
> warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
> functionality may not function properly.
>
> Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
> error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make
> sure that this dependency is installed before installing or running HPLIP.
>
> Checking for dependency: Python DBus - Python bindings for DBus...
> error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make
> sure that this dependency is installed before installing or running HPLIP.
>
> Checking for dependency: Python devel - Python development files...
> OK, found.
>
> Checking for dependency: Python libnotify - Python bindings for the
> libnotify Desktop notifications...
> OK, found.
>
> Checking for dependency: Python XML libraries...
> OK, found.
>
> Checking for dependency: Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
> Checking for dependency: Python 2.2 or greater - Python programming
> language...
> OK, found.
>
> Checking for dependency: Reportlab - PDF library for Python...
> warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
> functionality may not function properly.
>
> Checking for dependency: SANE - Scanning library...
> OK, found.
>
> Checking for dependency: SANE - Scanning library development files...
> OK, found.
>
> Checking for dependency: scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency: xsane - Graphical scanner frontend for SANE...
> OK, found.
>
>
> ----------------------
> | HPLIP INSTALLATION |
> ----------------------
>
>
> Currently installed HPLIP version...
> HPLIP 3.11.12 currently installed in '/usr/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf. Generated from hplip.conf.in by configure.
>
> [hplip]
> version=3.11.12
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/ppd/HP
> ppdbase=/usr/share/ppd
> doc=/usr/share/doc/hplip-3.11.12
> icon=/usr/share/applications
> cupsbackend=/usr/lib/cups/backend
> cupsfilter=/usr/lib/cups/filter
> drv=/usr/share/cups/drv/hp
>
> # Following values are determined at configure time and cannot be changed.
> [configure]
> network-build=yes
> pp-build=no
> gui-build=yes
> scanner-build=yes
> fax-build=no
> dbus-build=no
> cups11-build=no
> doc-build=yes
> shadow-build=no
> hpijs-install=yes
> foomatic-drv-install=no
> foomatic-ppd-install=yes
> foomatic-rip-hplip-install=no
> hpcups-install=no
> cups-drv-install=no
> cups-ppd-install=no
> internal-tag=3.11.12
> restricted-build=no
> ui-toolkit=no
> qt3=no
> qt4=no
> policy-kit=no
> hpijs-only-build=no
> lite-build=no
> udev-acl-rules=no
> hpcups-only-build=no
> hpijs-only-build=no
>
>
> Current contents of '/var/lib/hp/hplip.state' file:
> # hplip.state - HPLIP runtime persistent variables.
>
> [plugin]
> installed=0
> eula=0
>
>
>
> Current contents of '~/.hplip/hplip.conf' file:
>
>
> --------------------------
> | DISCOVERED USB DEVICES |
> --------------------------
>
> No devices found.
>
> ---------------------------------
> | INSTALLED CUPS PRINTER QUEUES |
> ---------------------------------
>
>
> BsAs-XP
> -------
> Type: Unknown
> Device URI: smb:///192.168.184.220/HPLaserJBSAS
> PPD: /etc/cups/ppd/BsAs-XP.ppd
> PPD Description: HP LaserJet P1505 Foomatic/foo2xqx (recommended)
> Printer Unable to connect to CIFS host after (tried 3 times)ep 2011
> 11:34:46 ART -
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
> BsAs_note
> ---------
> Type: Unknown
> Device URI: smb:///192.168.184.110/HP_BSAS
> PPD: /etc/cups/ppd/BsAs_note.ppd
> PPD Description: HP LaserJet P1505 Foomatic/foo2xqx (recommended)
> Printer status: la impresora BsAs_note está inactiva. activada desde vie 05
> mar 2010 15:29:23 ART
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
> HP
> --
> Type: Unknown
> Device URI: parallel:/dev/lp0
> PPD: /etc/cups/ppd/HP.ppd
> PPD Description: HP DeskJet 3810 Foomatic/hpijs (recommended)
> Printer Paused: impresora HP desactivada desde jue 21 abr 2011 13:42:13 ART
> -
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
> SCAN
> ----
> Type: Unknown
> Device URI: socket://192.168.84.182:9100
> PPD: /etc/cups/ppd/SCAN.ppd
> PPD Description: Brother MFC-5490CN CUPS v1.1
> Printer status: la impresora SCAN está inactiva. activada desde vie 04 feb
> 2011 18:55:55 ART
> warning: Printer is not HPLIP installed. Printers must use the hp: or
> hpfax: CUPS backend to function in HPLIP.
>
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in '/etc/sane.d/dll.conf'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
> device `brother3:net1;dev1' is a Brother MFC-5490CN MFC
> device `brother3:net1;dev0' is a Brother MFC-5490CN Scanner
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
> Checking 'hpmudext' I/O extension...
> OK, found.
>
> Checking 'scanext' SANE scanning extension...
> OK, found.
>
>
>
> ---------------
> | USER GROUPS |
> ---------------
>
> root bin daemon sys adm disk wheel
>
>
> -----------
> | SUMMARY |
> -----------
>
> error: 10 errors and/or warnings.
> _______________________________________________
> CentOS-es mailing list
> CentOS-es en centos.org
> http://lists.centos.org/mailman/listinfo/centos-es
> _______________________________________________
> CentOS-es mailing list
> CentOS-es en centos.org
> http://lists.centos.org/mailman/listinfo/centos-es
>
Más información sobre la lista de distribución CentOS-es