Sebastian Sala kirjoitti: > Hello again > > I've noticed that the issue with strange mirror selection applies only > with IPv6 addressing (I deployed it in the same period of time when the > systems started to use USA mirrors as the fastest one). When I disable > IPv6 on the host it starts to use my mirror. Yes, the reason why your mirror http://mirror-pl.kielcetechnologypark.net/centos/ is not listed on the IPv6 mirror list is that all the IPv6 mirror monitoring nodes (in ASs 31211, 29169, 13213, 6939) have problems connecting to your mirror. I don't know what's going on, but.. $ ping6 mirror-pl.kielcetechnologypark.net PING mirror-pl.kielcetechnologypark.net(2001:67c:1b8c:1100:603::5) 56 data bytes 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=1 ttl=55 time=52.5 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=2 ttl=55 time=58.3 ms From 2a02:f40:d100:2::2 icmp_seq=3 Destination unreachable: Unknown code 6 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=4 ttl=55 time=52.1 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=5 ttl=55 time=52.2 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=6 ttl=55 time=53.5 ms From 2a02:f40:d100:2::2 icmp_seq=7 Destination unreachable: Unknown code 6 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=8 ttl=55 time=52.3 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=9 ttl=55 time=52.2 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=10 ttl=55 time=52.5 ms From 2a02:f40:d100:2::2 icmp_seq=11 Destination unreachable: Unknown code 6 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=12 ttl=55 time=52.1 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=13 ttl=55 time=52.2 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=14 ttl=55 time=52.2 ms From 2a02:f40:d100:2::2 icmp_seq=15 Destination unreachable: Unknown code 6 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=16 ttl=55 time=52.2 ms 64 bytes from 2001:67c:1b8c:1100:603::5: icmp_seq=17 ttl=55 time=55.8 ms $ telnet mirror-pl.kielcetechnologypark.net 80 Trying 2001:67c:1b8c:1100:603::5... Connected to mirror-pl.kielcetechnologypark.net. Escape character is '^]'. Connection closed by foreign host. (connection closed immediately) $ telnet mirror-pl.kielcetechnologypark.net 80 Trying 2001:67c:1b8c:1100:603::5... telnet: connect to address 2001:67c:1b8c:1100:603::5: Protocol error Perhaps you should try connecting to your mirror from outside of your network over IPv6. Once you've figured out the problem and fixed it, the CentOS IPv6 mirrorlist servers will start directing traffic to your server again.