[CentOS-pt-br] Instalar virtualbox no centos 7
Gabriel Franca
gabriel.franca em gmail.com
Quarta Janeiro 21 19:50:54 UTC 2015
Boa Tarde Jean,
já testei com os 2.
No momento a versão do repositório e essa:
rpm -qa |grep VirtualBox
VirtualBox-4.3-4.3.20_96996_el7-1.x86_64
tentei também com o rpm que está na mesma versão.
VirtualBox-4.3-4.3.20_96996_el7-1.x86_64.rpm
é mesmo assim nada =\ voltei para o kernel default da instalação e nada =\
pode ser alguma coisa com a bios ? esse centos 7 foi instalado numa maquina desktop com sistema uefi.
Att,
Gabriel Franca
> Em 21/01/2015, à(s) 16:58, Jean Pereira <admin em olostech.com> escreveu:
>
>
> On 01/21/2015 03:34 PM, Gabriel Franca wrote:
>> então tenho sim tanto o devel quanto o headers.
>>
>> acredito que seja alguma coisa com o centos 7.
>>
>> desabilitei o firewall e o selinux tbm e nada =\
>>
>> no dmesg eu nao vi nada de erro tbm.
>>
> Baixou o pacote ou está utilizando o repo?
>> att,
>>
>> Gabriel Franca
>>
>>> Em 21/01/2015, à(s) 15:17, Jean Pereira <admin em olostech.com <mailto:admin em olostech.com>> escreveu:
>>>
>>> On 01/21/2015 01:52 PM, Gabriel Franca wrote:
>>>> Quando olhei não achei muita coisa nele. Segue um bom trecho do dmesg.
>>>>
>>> tu tens o devel do kernel instalado?
>>> tens também as dependências de compilação instaladas?
>>> eu tenho ele instalado, e ainda no kernel 3.18.3
>>> verifica também a versão dele, se está atualizado
>>>> [ 0.376277] efifb: scrolling: redraw
>>>> [ 0.376278] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>>>> [ 0.378586] Console: switching to colour frame buffer device 200x56
>>>> [ 0.380693] fb0: EFI VGA frame buffer device
>>>> [ 0.380697] intel_idle: MWAIT substates: 0x42120
>>>> [ 0.380698] intel_idle: v0.4 model 0x3C
>>>> [ 0.380698] intel_idle: lapic_timer_reliable_states 0xffffffff
>>>> [ 0.380758] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>>>> [ 0.380761] ACPI: Power Button [PWRB]
>>>> [ 0.380778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>>>> [ 0.380779] ACPI: Power Button [PWRF]
>>>> [ 0.380813] ACPI: Fan [FAN0] (off)
>>>> [ 0.380827] ACPI: Fan [FAN1] (off)
>>>> [ 0.380840] ACPI: Fan [FAN2] (off)
>>>> [ 0.380852] ACPI: Fan [FAN3] (off)
>>>> [ 0.380863] ACPI: Fan [FAN4] (off)
>>>> [ 0.380896] ACPI: Requesting acpi_cpufreq
>>>> [ 0.381261] thermal LNXTHERM:00: registered as thermal_zone0
>>>> [ 0.381262] ACPI: Thermal Zone [TZ00] (28 C)
>>>> [ 0.381390] thermal LNXTHERM:01: registered as thermal_zone1
>>>> [ 0.381391] ACPI: Thermal Zone [TZ01] (30 C)
>>>> [ 0.381409] GHES: HEST is not enabled!
>>>> [ 0.381449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>>>> [ 0.401972] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> [ 0.402257] Non-volatile memory driver v1.3
>>>> [ 0.402259] Linux agpgart interface v0.103
>>>> [ 0.402302] crash memory driver: version 1.1
>>>> [ 0.402315] rdac: device handler registered
>>>> [ 0.402338] hp_sw: device handler registered
>>>> [ 0.402339] emc: device handler registered
>>>> [ 0.402340] alua: device handler registered
>>>> [ 0.402355] libphy: Fixed MDIO Bus: probed
>>>> [ 0.402380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>>>> [ 0.402382] ehci-pci: EHCI PCI platform driver
>>>> [ 0.402440] ehci-pci 0000:00:1a.0: EHCI Host Controller
>>>> [ 0.402465] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>>>> [ 0.402474] ehci-pci 0000:00:1a.0: debug port 2
>>>> [ 0.406366] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>>>> [ 0.406379] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
>>>> [ 0.412032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>>>> [ 0.412054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>>>> [ 0.412056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>> [ 0.412057] usb usb1: Product: EHCI Host Controller
>>>> [ 0.412058] usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
>>>> [ 0.412058] usb usb1: SerialNumber: 0000:00:1a.0
>>>> [ 0.412117] hub 1-0:1.0: USB hub found
>>>> [ 0.412120] hub 1-0:1.0: 2 ports detected
>>>> [ 0.412226] ehci-pci 0000:00:1d.0: EHCI Host Controller
>>>> [ 0.412250] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>>>> [ 0.412260] ehci-pci 0000:00:1d.0: debug port 2
>>>> [ 0.416160] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>>>> [ 0.416171] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
>>>> [ 0.422032] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>>>> [ 0.422049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>>>> [ 0.422050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>> [ 0.422051] usb usb2: Product: EHCI Host Controller
>>>> [ 0.422052] usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd
>>>> [ 0.422053] usb usb2: SerialNumber: 0000:00:1d.0
>>>> [ 0.422111] hub 2-0:1.0: USB hub found
>>>> [ 0.422115] hub 2-0:1.0: 2 ports detected
>>>> [ 0.422183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>>>> [ 0.422184] ohci-pci: OHCI PCI platform driver
>>>> [ 0.422189] uhci_hcd: USB Universal Host Controller Interface driver
>>>> [ 0.422258] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>> [ 0.422284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>>>> [ 0.422354] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>>>> [ 0.422368] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
>>>> [ 0.422405] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>>>> [ 0.422406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>> [ 0.422407] usb usb3: Product: xHCI Host Controller
>>>> [ 0.422408] usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
>>>> [ 0.422409] usb usb3: SerialNumber: 0000:00:14.0
>>>> [ 0.422458] hub 3-0:1.0: USB hub found
>>>> [ 0.422467] hub 3-0:1.0: 10 ports detected
>>>> [ 0.424009] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>> [ 0.424031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>>>> [ 0.424050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>>>> [ 0.424051] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>> [ 0.424052] usb usb4: Product: xHCI Host Controller
>>>> [ 0.424053] usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd
>>>> [ 0.424054] usb usb4: SerialNumber: 0000:00:14.0
>>>> [ 0.424105] hub 4-0:1.0: USB hub found
>>>> [ 0.424109] hub 4-0:1.0: 2 ports detected
>>>> [ 0.428057] usbcore: registered new interface driver usbserial
>>>> [ 0.428061] usbcore: registered new interface driver usbserial_generic
>>>> [ 0.428065] usbserial: USB Serial support registered for generic
>>>> [ 0.428084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>>>> [ 0.428425] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> [ 0.428428] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> [ 0.428470] mousedev: PS/2 mouse device common for all mice
>>>> [ 0.428557] rtc_cmos 00:06: RTC can wake from S4
>>>> [ 0.428650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>>>> [ 0.428673] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>>>> [ 0.428679] Intel P-state driver initializing.
>>>> [ 0.428686] Intel pstate controlling: cpu 0
>>>> [ 0.428696] Intel pstate controlling: cpu 1
>>>> [ 0.428702] Intel pstate controlling: cpu 2
>>>> [ 0.428710] Intel pstate controlling: cpu 3
>>>> [ 0.428772] cpuidle: using governor menu
>>>> [ 0.429060] EFI Variables Facility v0.08 2004-May-17
>>>> [ 0.432153] hidraw: raw HID events driver (C) Jiri Kosina
>>>> [ 0.432198] usbcore: registered new interface driver usbhid
>>>> [ 0.432199] usbhid: USB HID core driver
>>>> [ 0.432217] drop_monitor: Initializing network drop monitor service
>>>> [ 0.432264] TCP: cubic registered
>>>> [ 0.432265] Initializing XFRM netlink socket
>>>> [ 0.432307] NET: Registered protocol family 10
>>>> [ 0.432394] NET: Registered protocol family 17
>>>> [ 0.432555] Loading compiled-in X.509 certificates
>>>> [ 0.432573] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
>>>> [ 0.432582] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
>>>> [ 0.432929] Loaded X.509 cert 'CentOS Linux kernel signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4'
>>>> [ 0.433053] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
>>>> [ 0.433065] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
>>>> [ 0.433161] EFI: Loaded cert 'Red Hat Inc.: 1ff96dd8d1b2327228c04b03a772dbb2dbb79b1f' linked to '.system_keyring'
>>>> [ 0.433241] registered taskstats version 1
>>>> [ 0.434522] Key type trusted registered
>>>> [ 0.435694] Key type encrypted registered
>>>> [ 0.437223] IMA: No TPM chip found, activating TPM-bypass!
>>>> [ 0.437711] rtc_cmos 00:06: setting system clock to 2015-01-21 13:18:01 UTC (1421846281)
>>>> [ 0.438214] Freeing unused kernel memory: 1584k freed
>>>> [ 0.445940] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>>>> [ 0.446072] systemd[1]: Running in initial RAM disk.
>>>> [ 0.446107] systemd[1]: Set hostname to <lx-cenb.cenb.local>.
>>>> [ 0.448642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>>>> [ 0.461386] systemd[1]: Expecting device dev-disk-by\x2duuid-6212bbac\x2d61a9\x2d4f9a\x2d97a9\x2d6fa34a7b2606.device...
>>>> [ 0.461395] systemd[1]: Starting -.slice.
>>>> [ 0.461482] systemd[1]: Created slice -.slice.
>>>> [ 0.461505] systemd[1]: Starting System Slice.
>>>> [ 0.461544] systemd[1]: Created slice System Slice.
>>>> [ 0.461562] systemd[1]: Starting Slices.
>>>> [ 0.461567] systemd[1]: Reached target Slices.
>>>> [ 0.461582] systemd[1]: Starting Timers.
>>>> [ 0.461587] systemd[1]: Reached target Timers.
>>>> [ 0.461602] systemd[1]: Starting Journal Socket.
>>>> [ 0.461631] systemd[1]: Listening on Journal Socket.
>>>> [ 0.461715] systemd[1]: Starting dracut cmdline hook...
>>>> [ 0.461940] systemd[1]: Started Load Kernel Modules.
>>>> [ 0.461950] systemd[1]: Starting Setup Virtual Console...
>>>> [ 0.462151] systemd[1]: Starting Journal Service...
>>>> [ 0.462351] systemd[1]: Started Journal Service.
>>>> [ 0.464889] systemd-journald[105]: Vacuuming done, freed 0 bytes
>>>> [ 0.535418] device-mapper: uevent: version 1.0.3
>>>> [ 0.535458] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel em redhat.com <mailto:dm-devel em redhat.com>
>>>> [ 0.552678] systemd-udevd[255]: starting version 208
>>>> [ 0.571038] sky2: driver version 1.30
>>>> [ 0.571055] sky2 0000:02:00.0: enabling device (0000 -> 0003)
>>>> [ 0.571127] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
>>>> [ 0.571173] sky2 0000:02:00.0: irq 46 for MSI/MSI-X
>>>> [ 0.571458] sky2 0000:02:00.0 eth0: addr 00:50:43:00:45:3e
>>>> [ 0.572014] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>>>> [ 0.573556] ACPI: bus type ATA registered
>>>> [ 0.573891] libata version 3.00 loaded.
>>>> [ 0.574366] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
>>>> [ 0.574439] [drm] Initialized drm 1.1.0 20060810
>>>> [ 0.574492] r8169 0000:03:00.0 eth1: RTL8168g/8111g at 0xffffc90000048000, 74:27:ea:7e:9a:3e, XID 0c000800 IRQ 47
>>>> [ 0.574494] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>>>> [ 0.575532] ahci 0000:00:1f.2: version 3.0
>>>> [ 0.575626] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
>>>> [ 0.575667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
>>>> [ 0.575669] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
>>>> [ 0.582134] scsi0 : ahci
>>>> [ 0.582216] scsi1 : ahci
>>>> [ 0.582260] scsi2 : ahci
>>>> [ 0.582302] scsi3 : ahci
>>>> [ 0.582436] scsi4 : ahci
>>>> [ 0.582555] scsi5 : ahci
>>>> [ 0.582624] ata1: SATA max UDMA/133 abar m2048 em 0xf7e1a000 port 0xf7e1a100 irq 48
>>>> [ 0.582626] ata2: SATA max UDMA/133 abar m2048 em 0xf7e1a000 port 0xf7e1a180 irq 48
>>>> [ 0.582627] ata3: DUMMY
>>>> [ 0.582628] ata4: DUMMY
>>>> [ 0.582629] ata5: SATA max UDMA/133 abar m2048 em 0xf7e1a000 port 0xf7e1a300 irq 48
>>>> [ 0.582631] ata6: SATA max UDMA/133 abar m2048 em 0xf7e1a000 port 0xf7e1a380 irq 48
>>>> [ 0.586809] [drm] Memory usable by graphics device = 2048M
>>>> [ 0.586812] checking generic (e0000000 57f000) vs hw (e0000000 10000000)
>>>> [ 0.586813] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
>>>> [ 0.586832] Console: switching to colour dummy device 80x25
>>>> [ 0.608828] i915 0000:00:02.0: irq 49 for MSI/MSI-X
>>>> [ 0.608834] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>>>> [ 0.608835] [drm] Driver supports precise vblank timestamp query.
>>>> [ 0.608876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>>> [ 0.616159] systemd-udevd[263]: renamed network interface eth0 to enp2s0
>>>> [ 0.625136] systemd-udevd[258]: renamed network interface eth1 to enp3s0
>>>> [ 0.645342] fbcon: inteldrmfb (fb0) is primary device
>>>> [ 0.714011] usb 1-1: new high-speed USB device number 2 using ehci-pci
>>>> [ 0.810014] Console: switching to colour frame buffer device 200x56
>>>> [ 0.812417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>>>> [ 0.812418] i915 0000:00:02.0: registered panic notifier
>>>> [ 0.818293] acpi device:58: registered as cooling_device9
>>>> [ 0.818317] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
>>>> [ 0.818341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
>>>> [ 0.818413] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>>>> [ 0.828317] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>>>> [ 0.828319] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>>> [ 0.828453] hub 1-1:1.0: USB hub found
>>>> [ 0.828562] hub 1-1:1.0: 4 ports detected
>>>> [ 0.851536] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
>>>> [ 0.886980] ata6: SATA link down (SStatus 0 SControl 300)
>>>> [ 0.886996] ata2: SATA link down (SStatus 0 SControl 300)
>>>> [ 0.887953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>>>> [ 0.887969] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>> [ 0.889289] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
>>>> [ 0.889292] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>>>> [ 0.890833] ata1.00: configured for UDMA/133
>>>> [ 0.890949] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
>>>> [ 0.895913] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>>>> [ 0.895916] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>>>> [ 0.895918] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>>>> [ 0.896989] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN01, max UDMA/133
>>>> [ 0.901740] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>>>> [ 0.901744] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>>>> [ 0.901746] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>>>> [ 0.902846] ata5.00: configured for UDMA/133
>>>> [ 0.908633] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN01 PQ: 0 ANSI: 5
>>>> [ 0.913461] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>>>> [ 0.913563] sd 0:0:0:0: [sda] Write Protect is off
>>>> [ 0.913566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>>> [ 0.913590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>>>> [ 0.927218] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>>>> [ 0.927221] cdrom: Uniform CD-ROM driver Revision: 3.20
>>>> [ 0.927326] sr 4:0:0:0: Attached scsi CD-ROM sr0
>>>> [ 0.930944] usb 2-1: new high-speed USB device number 2 using ehci-pci
>>>> [ 0.957906] sda: sda1 sda2 sda3
>>>> [ 0.958501] sd 0:0:0:0: [sda] Attached SCSI disk
>>>> [ 1.045263] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>>>> [ 1.045265] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>>> [ 1.045526] hub 2-1:1.0: USB hub found
>>>> [ 1.045622] hub 2-1:1.0: 6 ports detected
>>>> [ 1.298299] bio: create slab <bio-1> at 1
>>>> [ 1.358816] tsc: Refined TSC clocksource calibration: 3092.838 MHz
>>>> [ 1.358820] Switching to clocksource tsc
>>>> [ 1.427899] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>>>> [ 1.638118] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>>>> [ 1.655065] XFS (dm-1): Mounting Filesystem
>>>> [ 1.710838] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>>>> [ 1.730961] XFS (dm-1): Starting recovery (logdev: internal)
>>>> [ 1.800475] XFS (dm-1): Ending recovery (logdev: internal)
>>>> [ 2.043386] systemd-journald[105]: Received SIGTERM
>>>> [ 2.433172] SELinux: Disabled at runtime.
>>>> [ 2.433188] SELinux: Unregistering netfilter hooks
>>>> [ 2.453626] type=1404 audit(1421846283.515:2): selinux=0 auid=4294967295 ses=4294967295
>>>> [ 2.533548] systemd[1]: RTC configured in localtime, applying delta of -120 minutes to system time.
>>>> [ 4.910823] systemd-journald[502]: Vacuuming done, freed 0 bytes
>>>> [ 5.418360] RPC: Registered named UNIX socket transport module.
>>>> [ 5.418362] RPC: Registered udp transport module.
>>>> [ 5.418363] RPC: Registered tcp transport module.
>>>> [ 5.418364] RPC: Registered tcp NFSv4.1 backchannel transport module.
>>>> [ 5.653811] Installing knfsd (copyright (C) 1996 okir em monad.swb.de <mailto:okir em monad.swb.de>).
>>>> [ 5.825641] systemd-udevd[543]: starting version 208
>>>> [ 5.948570] wmi: Mapper loaded
>>>> [ 6.091263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>>>> [ 6.091759] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20130517/utaddress-254)
>>>> [ 6.091764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>>>> [ 6.091766] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254)
>>>> [ 6.091768] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254)
>>>> [ 6.091770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>>>> [ 6.091771] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254)
>>>> [ 6.091773] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254)
>>>> [ 6.091774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>>>> [ 6.091775] lpc_ich: Resource conflict(s) found affecting gpio_ich
>>>> [ 6.190543] input: PC Speaker as /devices/platform/pcspkr/input/input5
>>>> [ 6.281317] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254)
>>>> [ 6.281322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>>>> [ 6.303804] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
>>>> [ 6.655460] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>>>> [ 6.655572] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
>>>> [ 6.655611] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>>>> [ 6.655671] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
>>>> [ 6.665133] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
>>>> [ 6.673355] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
>>>> [ 6.673400] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
>>>> [ 6.673425] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
>>>> [ 6.673458] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
>>>> [ 6.673485] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
>>>> [ 6.925676] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>>>> [ 6.975776] iTCO_vendor_support: vendor-support=0
>>>> [ 6.976377] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>>>> [ 6.976400] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>>>> [ 6.976486] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>>>> [ 7.155967] alg: No test for crc32 (crc32-pclmul)
>>>> [ 8.169504] XFS (sda2): Mounting Filesystem
>>>> [ 8.458500] Adding 8142844k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8142844k FS
>>>> [ 8.613450] XFS (sda2): Ending clean mount
>>>> [ 8.805978] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>>>> [ 9.016790] XFS (dm-2): Mounting Filesystem
>>>> [ 10.554513] XFS (dm-2): Ending clean mount
>>>> [ 10.701631] systemd-journald[502]: Received request to flush runtime journal from PID 1
>>>> [ 10.705642] type=1305 audit(1421853491.770:3): audit_pid=763 old=0 auid=4294967295 ses=4294967295 res=1
>>>> [ 11.221459] sd 0:0:0:0: Attached scsi generic sg0 type 0
>>>> [ 11.221482] sr 4:0:0:0: Attached scsi generic sg1 type 5
>>>> [ 12.429406] sky2 0000:02:00.0 enp2s0: enabling interface
>>>> [ 12.429475] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
>>>> [ 12.551950] r8169 0000:03:00.0 enp3s0: link down
>>>> [ 12.551965] r8169 0000:03:00.0 enp3s0: link down
>>>> [ 12.551987] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
>>>> [ 14.201270] r8169 0000:03:00.0 enp3s0: link up
>>>> [ 14.201277] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
>>>> [ 14.582011] Ebtables v2.0 registered
>>>> [ 14.587104] ip_tables: (C) 2000-2006 Netfilter Core Team
>>>> [ 14.592056] ip6_tables: (C) 2000-2006 Netfilter Core Team
>>>>
>>>>> Em 21/01/2015, à(s) 13:48, Roberto Ferreira Lauretti <lauretti em ccuec.unicamp.br <mailto:lauretti em ccuec.unicamp.br>> escreveu:
>>>>>
>>>>> Boa tarde,
>>>>>
>>>>> Qual a mensagem de erro no dmesg?
>>>>> On 21-01-2015 13:46, Gabriel Franca wrote:
>>>>>> Boa Tarde Galera,
>>>>>>
>>>>>> Estou com uma dificuldade fiz a instalação do centos 7 atualizei e estou tentando instalar e configurar o Virtualbox.
>>>>>>
>>>>>> fiz toda a instalação, mais quando executo o comando /etc/init.d/vboxdrv setup tenho o seguinte retorno.
>>>>>>
>>>>>> /etc/init.d/vboxdrv setup
>>>>>> Stopping VirtualBox kernel modules [ OK ]
>>>>>> Recompiling VirtualBox kernel modules [ OK ]
>>>>>> Starting VirtualBox kernel modules [FALHOU]
>>>>>> (modprobe vboxdrv failed. Please use 'dmesg' to find out why)
>>>>>>
>>>>>> Alguém já conseguiu instalar o virtualbox no centos 7 ?
>>>>>>
>>>>>> Tentei esse tutorial tbm mais deu o mesmo erro.
>>>>>>
>>>>>> http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-on-centos-7-rhel-7.html#axzz3PSbTDjTW <http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-on-centos-7-rhel-7.html#axzz3PSbTDjTW>
>>>>>>
>>>>>>
>>>>>> Atenciosamente,
>>>>>>
>>>>>> Gabriel Franca
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> CentOS-pt-br mailing list
>>>>>> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
>>>>>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
>>>>>
>>>>> _______________________________________________
>>>>> CentOS-pt-br mailing list
>>>>> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
>>>>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> CentOS-pt-br mailing list
>>>> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
>>>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
>>>
>>> _______________________________________________
>>> CentOS-pt-br mailing list
>>> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
>>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
>>
>>
>>
>> _______________________________________________
>> CentOS-pt-br mailing list
>> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
>
> _______________________________________________
> CentOS-pt-br mailing list
> CentOS-pt-br em centos.org <mailto:CentOS-pt-br em centos.org>
> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: <http://lists.centos.org/pipermail/centos-pt-br/attachments/20150121/8bc7fa4b/attachment-0001.html>
Mais detalhes sobre a lista de discussão CentOS-pt-br