On Sat, 2007-11-10 at 12:18 -0800, Todd and Margo Chester wrote: > > ~~~~~~~~~~~~~~~~~ > > ifcfg-eth0: > > > > DEVICE=eth0 > > TYPE=Ethernet > > BOOTPROTO=static > > BROADCAST=192.168.255.255 > > IPADDR=192.168.255.12 > > NETMASK=255.255.255.0 > > NETWORK=192.168.255.0 > > GATEWAY=192.168.255.10 > > ONBOOT=yes > > USERCTL=yes > > IPV6INIT=no > > PEERDNS=no > > BRIDGE=br0 As I told in my previous reply some time ago, this is wrong. I had also included examples of how to set up a bridge correctly. With kind regards, Daniel de Kok