[CentOS-virt] Centos 6.5 Xen Stock cannot run dom-u PCI: Fatal: - ipmi_si

[Periko Support]

I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge 2950.

In both machines I setup centos 6.5, which is running
3.10.34-11.el6.centos.alt.x86_64.

I follow Xen4Cen wiki to setup Xen, I had other servers running Centos
5.x without issues.

Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I
receive different erros, let me show u the message I receive in my
console for centos 6.5 dum-u.

xl  console oerp-server
PCI: Fatal: No config space access function found
ipmi_si: Could not set up I/O space
ipmi_si: Could not set up I/O space
ipmi_si: Could not set up I/O space

Something related to ipmi in my server which is enable by default? can
be, now what happen is I try to boot xentos 5.9 x64 dom-u:

Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1402907331.494:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 691B840A64868995
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Initalizing network drop monitor service
Write protecting the kernel read-only data: 506k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading jbd.ko module
Loading ext3.ko module
Loading xenblk.ko module
XENBUS: Waiting for devices to initialise:
295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s...
XENBUS: Timeout connecting to device: device/vbd/51712 (local state 3,
remote state 1)
Loading dm-mod.ko module
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel at redhat.com
Loading dm-log.ko module
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading dm-mem-cache.ko module
Loading dm-region_hash.ko module
Loading dm-message.ko module
Loading dm-raid45.ko module
device-mapper: dm-raid45: initialized v0.2594l
Scanning and configuring dmraid supported devices
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  No volume groups found
Activating logical volumes
  Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!

Looks is not finding the dom-u disk.

In both cases I'm using almost the same settings:

name = "centos5"
uuid = "5020979f-8dae-105d-df56-9fb28d377aa2"
bootloader = "/usr/bin/pygrub"
memory = 2048
on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"
disk = [ "tap:aio:/ext4/centos5/disk.img,xvda,w" ]
vif = [ "mac=X:X:X:X:X:X,bridge=xenbr0,script=vif-bridge" ]

The main line of centos stock without Xen continue using kernel 2.6.x,
but Xen is using the new line 3.x.

Anyone else with this issue?

Thanks for your time.