[CentOS-virt] Centos 6.5 Xen Stock cannot run dom-u PCI: Fatal: - ipmi_si

Mon Jun 16 17:21:45 UTC 2014
Periko Support <pheriko.support at gmail.com>

---------------------------------------
So if I understand you correct - in 5.9 you did not see this, but
in 6.5 you do?
--------------------------------------

Yes, just with centos 6.5 dom-u.

But none of both vm's run.


On Mon, Jun 16, 2014 at 10:15 AM, Konrad Rzeszutek Wilk
<konrad.wilk at oracle.com> wrote:
> On Mon, Jun 16, 2014 at 08:42:49AM -0700, Periko Support wrote:
>> I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge 2950.
>>
>> In both machines I setup centos 6.5, which is running
>> 3.10.34-11.el6.centos.alt.x86_64.
>>
>> I follow Xen4Cen wiki to setup Xen, I had other servers running Centos
>> 5.x without issues.
>>
>> Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I
>> receive different erros, let me show u the message I receive in my
>> console for centos 6.5 dum-u.
>>
>> xl  console oerp-server
>> PCI: Fatal: No config space access function found
>> ipmi_si: Could not set up I/O space
>> ipmi_si: Could not set up I/O space
>> ipmi_si: Could not set up I/O space
>>
>> Something related to ipmi in my server which is enable by default? can
>> be, now what happen is I try to boot xentos 5.9 x64 dom-u:
>
> So if I understand you correct - in 5.9 you did not see this, but
> in 6.5 you do?
>
> And the error is that some driver that looks to be built in
> is telling you that it can't set up I/O space? Well, that is OK - if
> it can't it cannot.
>
>>
>> Brought up 1 CPUs
>> checking if image is initramfs... it is
>> Grant table initialized
>> NET: Registered protocol family 16
>> Brought up 1 CPUs
>> PCI: setting up Xen PCI frontend stub
>> ACPI: Interpreter disabled.
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI: disabled
>> xen_mem: Initialising balloon driver.
>> usbcore: registered new driver usbfs
>> usbcore: registered new driver hub
>> PCI: System does not support PCI
>> PCI: System does not support PCI
>> NetLabel: Initializing
>> NetLabel:  domain hash size = 128
>> NetLabel:  protocols = UNLABELED CIPSOv4
>> NetLabel:  unlabeled traffic allowed by default
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 262144 bind 65536)
>> TCP reno registered
>> audit: initializing netlink socket (disabled)
>> type=2000 audit(1402907331.494:1): initialized
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Initializing Cryptographic API
>> alg: No test for crc32c (crc32c-generic)
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key 691B840A64868995
>> - User ID: CentOS (Kernel Module GPG key)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> rtc: IRQ 8 is not free.
>> Non-volatile memory driver v1.2
>> Linux agpgart interface v0.101 (c) Dave Jones
>> brd: module loaded
>> Xen virtual console successfully installed as xvc0
>> Event-channel device installed.
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
>> ide-floppy driver 0.99.newide
>> usbcore: registered new driver hiddev
>> usbcore: registered new driver usbhid
>> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>> PNP: No PS/2 controller found. Probing ports directly.
>> i8042.c: No controller found.
>> mice: PS/2 mouse device common for all mice
>> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>> md: bitmap version 4.39
>> TCP bic registered
>> Initializing IPsec netlink socket
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> XENBUS: Device with no driver: device/vbd/51712
>> XENBUS: Device with no driver: device/vif/0
>> XENBUS: Device with no driver: device/console/0
>> Initalizing network drop monitor service
>> Write protecting the kernel read-only data: 506k
>> Red Hat nash version 5.1.19.6 starting
>> Mounting proc filesystem
>> Mounting sysfs filesystem
>> Creating /dev
>> Creating initial device nodes
>> Setting up hotplug.
>> Creating block device nodes.
>> Loading ehci-hcd.ko module
>> Loading ohci-hcd.ko module
>> Loading uhci-hcd.ko module
>> USB Universal Host Controller Interface driver v3.0
>> Loading jbd.ko module
>> Loading ext3.ko module
>> Loading xenblk.ko module
>> XENBUS: Waiting for devices to initialise:
>> 295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s...
>> XENBUS: Timeout connecting to device: device/vbd/51712 (local state 3,
>> remote state 1)
>> Loading dm-mod.ko module
>> device-mapper: uevent: version 1.0.3
>> device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel at redhat.com
>> Loading dm-log.ko module
>> Loading dm-mirror.ko module
>> Loading dm-zero.ko module
>> Loading dm-snapshot.ko module
>> Loading dm-mem-cache.ko module
>> Loading dm-region_hash.ko module
>> Loading dm-message.ko module
>> Loading dm-raid45.ko module
>> device-mapper: dm-raid45: initialized v0.2594l
>> Scanning and configuring dmraid supported devices
>> Scanning logical volumes
>>   Reading all physical volumes.  This may take a while...
>>   No volume groups found
>> Activating logical volumes
>>   Volume group "VolGroup00" not found
>> Creating root device.
>> Mounting root filesystem.
>> mount: could not find filesystem '/dev/root'
>> Setting up other filesystems.
>> Setting up new root fs
>> setuproot: moving /dev failed: No such file or directory
>> no fstab.sys, mounting internal defaults
>> setuproot: error mounting /proc: No such file or directory
>> setuproot: error mounting /sys: No such file or directory
>> Switching to new root and running init.
>> unmounting old /dev
>> unmounting old /proc
>> unmounting old /sys
>> switchroot: mount failed: No such file or directory
>> Kernel panic - not syncing: Attempted to kill init!
>>
>> Looks is not finding the dom-u disk.
>>
>> In both cases I'm using almost the same settings:
>>
>> name = "centos5"
>> uuid = "5020979f-8dae-105d-df56-9fb28d377aa2"
>> bootloader = "/usr/bin/pygrub"
>> memory = 2048
>> on_poweroff = "destroy"
>> on_reboot = "restart"
>> on_crash = "restart"
>> disk = [ "tap:aio:/ext4/centos5/disk.img,xvda,w" ]
>> vif = [ "mac=X:X:X:X:X:X,bridge=xenbr0,script=vif-bridge" ]
>>
>> The main line of centos stock without Xen continue using kernel 2.6.x,
>> but Xen is using the new line 3.x.
>>
>> Anyone else with this issue?
>>
>> Thanks for your time.
>> _______________________________________________
>> CentOS-virt mailing list
>> CentOS-virt at centos.org
>> http://lists.centos.org/mailman/listinfo/centos-virt
> _______________________________________________
> CentOS-virt mailing list
> CentOS-virt at centos.org
> http://lists.centos.org/mailman/listinfo/centos-virt