I wrote about this a couple months back. George asked me to submit to the Xen developers list, but I never had the time due to work demands on getting the new server set up. In my case, I had to use a different server. The new motherboard/CPU had no issues with the second CPU. If you turn off and unplug the second CPU, it will work. Check the archives for my e-mail address and see George's replies. If you can follow through with reporting it, that would be great. -- Craig Thompson, President Caldwell Global Communications, Inc. +1 (423) 559-5465 caldwellglobal.com -----Original message----- From: Alvin Starr <alvin at netvel.net> Sent: Thursday 4th February 2016 9:30 To: Discussion about the virtualization on CentOS <centos-virt at centos.org> Subject: [CentOS-virt] c7 xen-4.6 crash. Installing xen on a fairly clean c7.2 system. I get a xen kernel panic. (XEN) Bad console= option 'tty' Xen 4.6.0-9.el7 (XEN) Xen version 4.6.0-9.el7 (mockbuild at centos.org) (gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4)) debug=n Wed Jan 20 12:25:53 UTC 2016 (XEN) Latest ChangeSet: Thu Jan 14 15:35:35 2016 +0000 git:6e8597a-dirty (XEN) Bootloader: GRUB 2.02~beta2 (XEN) Command line: placeholder dom0_mem=1024M,max:1024M cpuinfo com1=115200,8n1 console=com1,tty loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ac00 (usable) (XEN) 000000000009ac00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bffc7280 (usable) (XEN) 00000000bffc7280 - 00000000bffceac0 (ACPI data) (XEN) 00000000bffceac0 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000840000000 (usable) (XEN) ACPI: RSDP 000FDFD0, 0024 (r2 IBM ) (XEN) ACPI: XSDT BFFCE980, 0054 (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: FACP BFFCE8C0, 0084 (r2 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: DSDT BFFC7280, 2F12 (r2 IBM SERVALNT 1000 INTL 20041203) (XEN) ACPI: FACS BFFCA7C0, 0040 (XEN) ACPI: APIC BFFCE800, 0084 (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: SRAT BFFCE6C0, 00E8 (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: HPET BFFCE680, 0038 (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: MCFG BFFCE640, 003C (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) ACPI: ERST BFFCA800, 0230 (r1 IBM SERVALNT 1000 IBM 45444F43) (XEN) System RAM: 32767MB (33553796kB) (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 6 -> Node 0 (XEN) SRAT: PXM 0 -> APIC 7 -> Node 0 (XEN) SRAT: Node 0 PXM 0 0-c0000000 (XEN) SRAT: Node 0 PXM 0 100000000-840000000 (XEN) SRAT: Node 0 PXM 0 840000000-841000000 (hotplug) (XEN) NUMA: Using 18 for the hash shift. (XEN) Domain heap initialised (XEN) found SMP MP-table at 0009ad40 (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x588 (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:584,1:0], pm1x_evt[1:580,1:0] (XEN) ACPI: wakeup_vec[bffca7cc], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) (XEN) Processor #6 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) (XEN) Processor #7 6:15 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) Invalid bit width in GAR (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 4096K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) CMCI: CPU0 has no CMCI support (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) Intel machine check reporting enabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2992.543 MHz processor. (XEN) Initing memory sharing. (XEN) alt table ffff82d0802b8c50 -> ffff82d0802b9ff4 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 25 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-25 (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pde. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) Invalid bit width in GAR (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 4 CPUs (0 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 4096K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) CMCI: CPU0 has no CMCI support (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) Intel machine check reporting enabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2992.579 MHz processor. (XEN) Initing memory sharing. (XEN) alt table ffff82d0802b8c50 -> ffff82d0802b9ff4 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - 25 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) PCI: Using MCFG for segment 0000 bus 00-25 (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 32 KiB. (XEN) mwait-idle: does not run on family 6 model 15 (XEN) VMX: Supported advanced features:ing 06 (XEN) CPU 2 APIC 6 -> Node 0 (XEN) Booting processor 2/6 eip 8a000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 4096K (XEN) CPU: Physical Processor ID: 3 (XEN) CPU: Processor Core ID: 0 (XEN) CMCI: CPU2 has no CMCI support (XEN) CPU2: Thermal monitoring enabled (TM2) (XEN) CPU2: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 (XEN) ----[ Xen-4.6.0-9.el7 x86_64 debug=n Not tainted ]---- (XEN) CPU: 2 (XEN) RIP: e008:[<ffff82d080181c79>] set_cpu_sibling_map+0x39/0x340 (XEN) RFLAGS: 0000000000010006 CONTEXT: hypervisor (XEN) rax: 0000000000000020 rbx: 0000000000000200 rcx: 00000037a6cb1580 (XEN) rdx: 0000000000000003 rsi: 0000000000000000 rdi: 0000000000000002 (XEN) rbp: 00000000000000c8 rsp: ffff830826fb7e90 r8: 00000037a6cb1580 (XEN) r9: 00000037a6cb1580 r10: 0000000000000007 r11: 0000000000000001 (XEN) r12: 0000000000000002 r13: 0000000000000002 r14: 0000000000000000 (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000000026e0 (XEN) cr3: 00000000bfc70000 cr2: 0000000000000020 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen stack trace from rsp=ffff830826fb7e90: (XEN) ffff82d0802f4380 0000000000000012 0000000000000000 00000100801ad2d1 (XEN) ffff82d0802f4380 0000000000000000 00000000000000c8 0000000000000002 (XEN) 0000000000000002 0000000000000000 0000000000000000 ffff82d08018213c (XEN) 0000000000000000 0000000000000001 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000002 ffff8300bffa5000 (XEN) 00000037a6cb1580 0000000000000000 (XEN) Xen call trace: (XEN) [<ffff82d080181c79>] set_cpu_sibling_map+0x39/0x340 (XEN) [<ffff82d08018213c>] start_secondary+0x1bc/0x260 (XEN) (XEN) Pagetable walk from 0000000000000020: (XEN) L4[0x000] = 000000083d21c063 ffffffffffffffff (XEN) L3[0x000] = 000000083d21b063 ffffffffffffffff (XEN) L2[0x000] = 000000083d21a063 ffffffffffffffff (XEN) L1[0x000] = 0000000000000000 ffffffffffffffff (XEN) (XEN) **************************************** (XEN) Panic on CPU 2: (XEN) FATAL PAGE FAULT (XEN) [error_code=0002] (XEN) Faulting linear address: 0000000000000020 (XEN) **************************************** (XEN) (XEN) Reboot in five seconds... (XEN) Resetting with ACPI MEMORY or I/O RESET_REG. -- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 alvin at netvel.net || _______________________________________________ CentOS-virt mailing list CentOS-virt at centos.org https://lists.centos.org/mailman/listinfo/centos-virt -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20160204/3a8d6f5e/attachment-0004.html>