[CentOS-virt] 4.9 kernel fails to boot because it didn't have the mpt3sas module

Jerry

jerryubi at gmail.com
Wed May 17 20:30:36 UTC 2017


On Wed, May 17, 2017 at 10:07 AM, Sarah Newman <srn at prgmr.com> wrote:

> On 05/16/2017 09:04 PM, Jerry wrote:
> <snip>
> >
> > Turns out dracut was unable to mount the root file system.  So I went
> back
> > into the 3.10 kernel again to see if the mpt2sas or mpt3sas driver was in
> > its initramfs file... and it wasn't:
> >
> >
> > $ sudo lsinitrd -k 4.9.25-27.el7.x86_64 | grep mpt
> > -rw-r--r--   1 root     root            0 May 16 12:39 etc/fstab.empty
> > -rw-r--r--   1 root     root           22 Nov  5  2016
> > usr/lib/kbd/unimaps/empty.uni
> >
> > For comparison:
> >
> > $ sudo lsinitrd -k 3.10.0-514.16.1.el7.x86_64 | grep mpt
> > -rw-r--r--   1 root     root            0 May 16 04:37 etc/fstab.empty
> > -rw-r--r--   1 root     root           22 Nov  5  2016
> > usr/lib/kbd/unimaps/empty.uni
> > drwxr-xr-x   2 root     root            0 May 16 04:37
> > usr/lib/modules/3.10.0-514.16.1.el7.x86_64/kernel/drivers/scsi/mpt3sas
> > -rw-r--r--   1 root     root       379021 Apr 12 08:51
> > usr/lib/modules/3.10.0-514.16.1.el7.x86_64/kernel/drivers/
> scsi/mpt3sas/mpt2sas.ko
> >
> >
> > So I added it:
> >
> >
> > $ sudo dracut --force --add-drivers mpt3sas --kver=4.9.25-27.el7.x86_64
> > $ sudo lsinitrd -k 4.9.25-27.el7.x86_64 | grep mpt
> > Arguments: --force --add-drivers 'mpt3sas' --kver '4.9.25-27.el7.x86_64'
> > -rw-r--r--   1 root     root            0 May 16 12:57 etc/fstab.empty
> > -rw-r--r--   1 root     root           22 Nov  5  2016
> > usr/lib/kbd/unimaps/empty.uni
> > drwxr-xr-x   2 root     root            0 May 16 12:57
> > usr/lib/modules/4.9.25-27.el7.x86_64/kernel/drivers/scsi/mpt3sas
> > -rwxr--r--   1 root     root       374152 May 16 12:57
> > usr/lib/modules/4.9.25-27.el7.x86_64/kernel/drivers/scsi/
> mpt3sas/mpt3sas.ko
> >
> >
> > After this I was able to get the 4.9 kernel to boot and Xen is now
> working.
>
> You should be able to make this change permanently from /etc/dracut.conf
> with
> the add_drivers+= line, or build a generic initrd with hostonly="no" .
>

Thank you for this.  Adding mpt2sas or mpt3sas to the drivers+ line
worked.  Running dracut generates a proper image now.


> I don't know why it wasn't originally added.
>
> --Sarah
>

For some reason each of the 5, 6 & 7 releases have issues with the mpt2sas
driver (there isn't enough swiotlb allocated by default for the driver to
work properly, and the units for that parameter changed between 5 and 6).
It's like this driver has bad luck or something.

Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20170517/0f97dfcd/attachment-0002.html>


More information about the CentOS-virt mailing list