[Centos] Problems with CentOS 3.3 Disk2 Iso Image?

Tue Oct 12 21:14:50 UTC 2004
donavan nelson <donavan at 4wx.net>

Geoff where did you get this information?  I'd be interesting in reading it.

Typically, these issues are:
1) cheap/low quality media,
2) burning at 48X and hoping that old 4x IDE cdrom will read the disk 
while trying to install.

As a test, turn around and mount mount the CD on the machine that burned 
the disk and try doing a "cp -a" off the cd to your hard disk.

A better option, particularly if you have enough machines is to setup a 
machine as a install server.  Over the lan it's much faster than CD (for 
me any YMMV).  This box can also be turned into a local repository for 
yum updates.  It's also much faster doing an upgrade off a local box. :)

.dn

Geoff Galitz wrote:

>
>
> I recently had the same problem.  The package checksums and
> everything else turned out to be good and we figured the
> problem was with the original RHEL install/upgrade process.
>
> I did manage to Centos 3.3 working by installing 3.1 and then
> using yum to upgrade, but it does make me nervous.
>
>
>
> -geoff
>
> On Oct 12, 2004, at 1:04 PM, Scott Sharkey wrote:
>
>> Hi All,
>>
>> I've downloaded this image (disk 2) from several sites, and it 
>> matches the MD5 sum.  Burning it to a CD gives no errors, but the 
>> disk is failing the self-check at the start, and if I ignore that and 
>> try to install I get random packages which "cannot be read".  I know 
>> the burner is OK, as I've burned other CDs on it just fine after 
>> burning the CentOS ones.  Any thoughts?
>>
>> -Scott
>> _______________________________________________
>> CentOS mailing list
>> CentOS at caosity.org
>> http://lists.caosity.org/mailman/listinfo/centos
>>
> http://www.galitz.org
>
> _______________________________________________
> CentOS mailing list
> CentOS at caosity.org
> http://lists.caosity.org/mailman/listinfo/centos
>