[Centos] RE: CentOS digest, Vol 1 #137 - 12 msgs

Blaž Bogataj

Blaz.Bogataj at zgs.gov.si
Fri Sep 24 12:45:16 UTC 2004


Ulrik wrote:

Message: 2
Date: Thu, 23 Sep 2004 14:59:14 +0200 (CEST)
From: "Ulrik S. Kofod" <usk at cybersite.dk>
To: centos at caosity.org
Reply-To: usk at cybersite.dk
Subject: [Centos] network card / kudzu

When I have installed centOS, Kudzu says my network cards have been removed,
and 
right after it finds them again and asks me to configure them?

It looks like it is the same thing it finds that it just said was removed.

There are 3 Relatek|RTL-8139/8139C/8139C+ cards in there and it is all of
them it
will remove and reconfigure.

It doesn't matter if I select ignore or reconfigure them, they still work
after the
reboot. It is just a little strange and seems a little buggy ;)


brgds Ulrik
-------
Hello

I have the same problem. I move lan card into another slot (pci) and now
everything work fine.

Blaž

-----Original Message-----
From: centos-request at caosity.org [mailto:centos-request at caosity.org]
Sent: Friday, September 24, 2004 5:21 AM
To: centos at caosity.org
Subject: CentOS digest, Vol 1 #137 - 12 msgs


Send CentOS mailing list submissions to
	centos at caosity.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://www.caosity.org/mailman/listinfo/centos
or, via email, send a message with subject or body 'help' to
	centos-request at caosity.org

You can reach the person managing the list at
	centos-admin at caosity.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CentOS digest..."


Today's Topics:

   1. Re: did I write that nVIDIA cards never work? (Rick Graves)
   2. network card / kudzu (Ulrik S. Kofod)
   3. Need apache ftp help please (Beth Curotto)
   4. CPAN problems? (Ulrik S. Kofod)
   5. Re: Need apache ftp help please (Mike)
   6. Re: Need apache ftp help please (Nels Lindquist)
   7. CentOS-3 errata - updated samba packages fix vulnerabilities (Lance
Davis)
   8. CentOS-3 errata : Updated redhat-config-nfs package resolves
       several security issues (Lance Davis)
   9. Re: nVIDIA on CentOS 3.3 (John Newbigin)
  10. Re: Need apache ftp help please (John Newbigin)
  11. HOWTO?  Upgrade Centos-2 to Centos-3 (jabevan at shistudios.com)

--__--__--

Message: 1
Date: Thu, 23 Sep 2004 05:41:28 -0700 (PDT)
From: Rick Graves <gravesricharde at yahoo.com>
To: centos at caosity.org
Subject: [Centos] Re: did I write that nVIDIA cards never work?

Denis,

You wrote:

> You may have problems on your side...but you 
can't generalise and say that it does not work.  

Maybe you have me confused with someone else.  

I did not write or imply that nVIDIA cards never work.
 Rather, I wrote that they may not work.  By this, I
meant that they do not work with some monitors.  

I checked what I wrote, and I believe the above
paragraph is correct.  If you disagree with me and
stand by your statement, please refer me to the
sentence(s) that I wrote that back you up.  

In addition to me, two people have written to the
group recently about the nVIDIA problem.  They can
vouch for the fact that there is sometimes a problem. 


I agree that nVIDIA cards work for many people
(including for me, which I also wrote).  But the fact
that they work for many people does not solve the
problem when one does not work with a specific
monitor.  

This topic is near and dear to my heart, as I first
encountered the problem when I was trying to install
CentOS on machine with an nVIDIA card and using a
monitor with which nVIDIA cards do not work (my Mag
DX1495).  At the beginning, I did not know that the
card was the problem, I only knew that the screen went
blank toward the end of the install.  In addition to
trying to solve the problem by tweeking the XF86Config
file (boy, was that futile!), it literally took me
hours of parts swapping, distribution swapping, and OS
swapping (trying Windows too), to finally figure out
that the nVIDIA card was the problem.  (Some might say
that the card/monitor combination was the problem, but
Windows has no problem with the combination.)

Maybe my frustration with nVIDIA cards shows, and as a
result, my emails on this topic are easily
misinterpreted.  

Rick


> Message: 8
> Date: Wed, 22 Sep 2004 20:38:24 -0400
> From: "Denis E. Pilon" <dpilon at dpilon.com>
> To: Rick Graves <gravesricharde at yahoo.com>
> Cc: centos at caosity.org
> Subject: Re: [Centos] Re: nVIDIA on Linux -- less is
more
> 
> Rick,
> 
> Because the nVIDIA does not work for you doesn't
mean it does not 
> work..
> 
> I have been using the nVIDIA driver since i
installed pre 3.1(the 
> beta's) and have not had any issues...so please....
do not state that 
> is 
> does not work...it does.  You may have problems on
your side...but you 
> can't generalise and say that it does not work. 
Take a poll and see 
> how 
> many people have it working.
> 
> DP
> 

--__--__--

Message: 2
Date: Thu, 23 Sep 2004 14:59:14 +0200 (CEST)
From: "Ulrik S. Kofod" <usk at cybersite.dk>
To: centos at caosity.org
Reply-To: usk at cybersite.dk
Subject: [Centos] network card / kudzu

When I have installed centOS, Kudzu says my network cards have been removed,
and 
right after it finds them again and asks me to configure them?

It looks like it is the same thing it finds that it just said was removed.

There are 3 Relatek|RTL-8139/8139C/8139C+ cards in there and it is all of
them it
will remove and reconfigure.

It doesn't matter if I select ignore or reconfigure them, they still work
after the
reboot. It is just a little strange and seems a little buggy ;)


brgds Ulrik

--__--__--

Message: 3
From: "Beth Curotto" <bcurotto at abni.com>
To: "CentOS Mailing List" <centos at caosity.org>
Date: Thu, 23 Sep 2004 11:22:24 -0500
Subject: [Centos] Need apache ftp help please

This is a multi-part message in MIME format.

------=_NextPart_000_0019_01C4A15F.99A3F240
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

System = CentOS / Apache 2.0 / HTML files location =  /var/www/html

Nat'd IP - ports 80, 20, 21 already opened & routed to internal ip.

I desperately need the quick & dirty solution.

I need a setup where one user can ftp from another desktop (windows) to
upload new website files. I currently have CuteFTP, but will use anything
needed at this point.

I need to try to test this today. VERY new to linux, I am completely bogged
down trying to learn command-line syntax.

Thanks in advance, Beth




------=_NextPart_000_0019_01C4A15F.99A3F240
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1458" name=3DGENERATOR></HEAD>
<BODY>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004>System =
=3D CentOS /=20
Apache 2.0 / <SPAN class=3D218451416-23092004>HTML files location =
=3D =20
/var/www/html</SPAN></SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004><SPAN=20
class=3D218451416-23092004></SPAN></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004><SPAN=20
class=3D218451416-23092004>Nat'd IP - ports 80, 20, 21 already opened =
& routed=20
to internal ip.</SPAN></SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004>I =
desperately need=20
the quick & dirty solution.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004>I =
need a setup=20
where one user can ftp from another desktop (windows) to upload new =
website=20
files. I currently have CuteFTP, but will use anything needed at this=20
point.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004>I need =
to try to=20
test this today. VERY new to linux, I am completely bogged down trying =
to learn=20
command-line syntax.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN class=3D218451416-23092004>Thanks =
in advance,=20
Beth</SPAN></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2><SPAN=20
class=3D218451416-23092004></SPAN></FONT> </DIV></BODY></HTML>

------=_NextPart_000_0019_01C4A15F.99A3F240--



--__--__--

Message: 4
Date: Thu, 23 Sep 2004 19:09:30 +0200 (CEST)
From: "Ulrik S. Kofod" <usk at cybersite.dk>
To: centos at caosity.org
Reply-To: usk at cybersite.dk
Subject: [Centos] CPAN problems?


Sorry if this is off topic, but the cpan mail list seems quite ded, and I
was
wondering if any of you have had the same problem.

when ever I do a
perl -MCPAN -e "install Bundle::CPAN"

I get this error:
----------------------------------
Net::Telnet is up to date.
Net::Cmd is up to date.
Bundle summary: The following items in bundle Bundle::libnet had
installation problems:
  Data::Dumper
Term::ReadKey is up to date.
Term::ReadLine::Perl is up to date.
CPAN is up to date.
Bundle summary: The following items in bundle Bundle::CPAN had installation
problems:
  Digest::MD5 Bundle::libnet and the following items had problems during
  recursive bundle calls: Data::Dumper
----------------------------------

I have done it on my redhat9 and centos-3.3 box and both gave same error?
Anybody out there have a solution ?

brgds Ulrik



--__--__--

Message: 5
Date: Thu, 23 Sep 2004 13:07:37 -0700
From: Mike <addymin at pacbell.net>
Reply-To: addymin at pacbell.net
To: Beth Curotto <bcurotto at abni.com>
Cc: CentOS Mailing List <centos at caosity.org>
Subject: Re: [Centos] Need apache ftp help please

Beth Curotto wrote:

> System = CentOS / Apache 2.0 / HTML files location =  /var/www/html
>  
> Nat'd IP - ports 80, 20, 21 already opened & routed to internal ip.
>  
> I desperately need the quick & dirty solution.
>  
> I need a setup where one user can ftp from another desktop (windows) to 
> upload new website files. I currently have CuteFTP, but will use 
> anything needed at this point.
>  
> I need to try to test this today. VERY new to linux, I am completely 
> bogged down trying to learn command-line syntax.
>  
> Thanks in advance, Beth
>  
Beth:

I use pure-ftpd. I've found this ftp server to be the easiest and most 
secure to set-up for Redhat systems.  Go to:

http://www.pureftpd.org/

The Redhat binary (rpm) version can be downloaded here:

ftp://ftp.pureftpd.org/pub/pure-ftpd/releases/binaries/redhat/

You'll probably want the "i686" version.

Install the rpm package (you'll need to be root to do this):

# rpm -Uvh pure-ftpd-1.0.19-1.i686.rpm

And that's it.

Michael



--__--__--

Message: 6
From: "Nels Lindquist" <nlindq at maei.ca>
Organization: Morningstar Air Express Inc.
To: "CentOS Mailing List" <centos at caosity.org>
Date: Thu, 23 Sep 2004 14:09:50 -0600
Subject: Re: [Centos] Need apache ftp help please

On 23 Sep 2004 at 11:22, Beth Curotto wrote:

> System = CentOS / Apache 2.0 / HTML files location =  /var/www/html
> 
> Nat'd IP - ports 80, 20, 21 already opened & routed to internal ip.

Port 20 outgoing, you mean?  Shouldn't need to be any connections 
*to* port 20 on the FTP server.
 
> I desperately need the quick & dirty solution.
> 
> I need a setup where one user can ftp from another desktop (windows) to
> upload new website files. I currently have CuteFTP, but will use anything
> needed at this point.

First of all, make sure the vsftpd package is installed and running.
(rpm -q vsftpd)

If it's not, it'll be on your install media or can easily be acquired 
with "yum -y install vsftpd"

Then do "service vsftpd start" to start the FTP server.

Are you just trying to prove the concept today, or do you need your 
user to be able to upload files to the document root right now?

If the former, simply create a new user account and set a password 
for it.  The vsftpd server will immediately allow logins to the 
users' home directory with their username/password.  Any files placed 
in public_html/ in a home directory should be automatically mapped by 
apache to httpd://[server.dom.ain]/~[userid]/.  If you need to upload 
files directly to the document root, things get a little more 
complicated, and there's more than one approach depending on how 
security-conscious you need to be.

----
Nels Lindquist <*>
Information Systems Manager
Morningstar Air Express Inc.


--__--__--

Message: 7
From: Lance Davis <lance at uklinux.net>
To: centos at caosity.org
Date: Thu, 23 Sep 2004 23:01:58 +0100
Subject: [Centos] CentOS-3 errata - updated samba packages fix
vulnerabilities


--=-ph1kc/BbstdGPcTVa9OH
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable


There are updated samba packages for CentOS 3.3 (and added to 3.1)

https://rhn.redhat.com/errata/RHSA-2004-467.html refers

Updated files are :-

samba-3.0.7-1.3E.i386.rpm
samba-client-3.0.7-1.3E.i386.rpm
samba-common-3.0.7-1.3E.i386.rpm
samba-swat-3.0.7-1.3E.i386.rpm
samba-3.0.7-1.3E.i386.rpm=20

all in updates/i386/RPMS/

These are available at http://mirror.centos.org/3.1/ and should be on
all mirrors within a few hours.
                                                                           =
                                                                           =
      =20
To update to the latest version 'yum update samba' should be
sufficient.


--=-ph1kc/BbstdGPcTVa9OH
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQBBU0fUf8AOBGbcgBERAtW8AKCVt4zdSHN15mzs9Pj6K6eAWlUEXQCePw0+
Wgo/K46yPwjhixhjC/a06YM=
=VE1r
-----END PGP SIGNATURE-----

--=-ph1kc/BbstdGPcTVa9OH--


--__--__--

Message: 8
From: Lance Davis <lance at uklinux.net>
To: centos at caosity.org
Date: Thu, 23 Sep 2004 23:07:54 +0100
Subject: [Centos] CentOS-3 errata : Updated redhat-config-nfs package
resolves
 several security issues


--=-nw6/Yj36rMh53AAcpFwT
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable


There is an updated redhat-config-nfs package for CentOS 3.3 (and added
to 3.1)

https://rhn.redhat.com/errata/RHSA-2004-434.html refers



Updated file is :-

redhat-config-nfs-1.0.13-6.noarch.rpm

in updates/i386/RPMS/

This is available at http://mirror.centos.org/3.1/ and should be on all
mirrors within a few hours.
                                                                           =
                                                                           =
      =20
To update to the latest version 'yum update redhat-config-nfs' should be
sufficient.




--=-nw6/Yj36rMh53AAcpFwT
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQBBU0k5f8AOBGbcgBERAr0gAKCgZg1IUeWjUn3y4q4V20JFMlhEHwCghVnM
5wKxY5ePxiORBh59GNgmGus=
=Oe2P
-----END PGP SIGNATURE-----

--=-nw6/Yj36rMh53AAcpFwT--


--__--__--

Message: 9
Date: Fri, 24 Sep 2004 08:42:22 +1000
From: John Newbigin <jn at it.swin.edu.au>
Cc: CentOS Users <centos at caosity.org>
Subject: Re: [Centos] nVIDIA on CentOS 3.3

We prefer to nvidia cards with CentOS-2.  I have never had the problem 
of a monitor not being detected, though if you have tv out and no 
monitor plugged in then tv out will be used when the machine is powered on.

I have an RPM which I wrote which rebuilds the driver (if necessary) and 
loads it at boot time.  Because it contains the nvidia package I don't 
know if I can redistribute it (have not checked) but here is my source 
part (Not tested with CentOS-3):

nvidia.spec
===========
Summary: NVIDIA driver for XFree86
Name: nvidia
Version: 5336
Release: 1
Vendor: Nvidia
Distribution: Premonition
Packager: John Newbigin <jn at it.swin.edu.au>
License: Unknown
Group: Applications/System
BuildRoot: /var/tmp/%{name}-root
Source0: NVIDIA-Linux-x86-1.0-%{version}-pkg1.run
Source1: nvidia.rc

%description
NVIDIA driver for XFree86

%prep
if [ -d nvidia ] ; then
   rm -rf nvidia
fi
mkdir nvidia
cd nvidia
sh %{SOURCE0} -x

rm NVIDIA-Linux-x86-1.0-*/usr/src/nv/precompiled/*

%build

%install
cd nvidia
rm -rf ${RPM_BUILD_ROOT}
mkdir -p ${RPM_BUILD_ROOT}/opt/nvidia
cp -r NVIDIA-Linux-x86-1.0-*/* ${RPM_BUILD_ROOT}/opt/nvidia
cp -r NVIDIA-Linux-x86-1.0-*/.manifest ${RPM_BUILD_ROOT}/opt/nvidia
mkdir -p ${RPM_BUILD_ROOT}/etc/rc.d/init.d
cp %{SOURCE1} ${RPM_BUILD_ROOT}/etc/rc.d/init.d/nvidia

%clean
rm -rf $RPM_BUILD_ROOT

%files
%defattr(-, root, root, 0755)

/etc/rc.d/init.d/nvidia
/opt/nvidia/.manifest
/opt/nvidia/*

%post
if [ "$1" = "1" ] ; then
    chkconfig --add nvidia
    service nvidia start
    service nvidia configure
else
    service nvidia stop
    service nvidia uninstall
    service nvidia start
fi

%preun
if [ "$1" = "0" ] ; then
    service nvidia stop
    service nvidia uninstall
    chkconfig --del nvidia
fi

%changelog
* Wed May 19 2004 John Newbigin <jn at it.swin.edu.au>
- First Cut


nvidia.rc
=========
#!/bin/bash
#
# chkconfig: 5 85 15
# description: Builds the nvidia kernel module for X11

# source function library
. /etc/rc.d/init.d/functions

RETVAL=0

start() {
    NEED_BUILD=1
    if [ -f /lib/modules/`uname -r`/kernel/drivers/video/nvidia.o ] ; then
       echo -n $"Loading nvidia driver"
       modprobe nvidia > /dev/null 2>/dev/null
       if grep -q nvidia /proc/modules ; then
          success $"Loading nvidia driver"
          echo
          NEED_BUILD=0
       else
          failure $"Loading nvidia driver"
          echo
       fi
    fi

    if [ $NEED_BUILD == 1 ] ; then
       echo -n $"Building nvidia driver"
       cd /opt/nvidia
       ./nvidia-installer --silent --no-precompiled-interface 
--no-network >/dev/null 2>/dev/null

       if grep -q "is now complete" /var/log/nvidia-installer.log ; then
          success $"Building nvidia driver"
          echo
          echo -n $"Loading nvidia module"
          modprobe nvidia > /dev/null 2>/dev/null
          if grep -q nvidia /proc/modules ; then
             success $"Loading nvidia module"
             echo
          else
             failure $"Loading nvidia module"
             echo
          fi
       else
          failure $"Building nvidia driver"
          echo
       fi
    fi
}

stop() {
         echo -n $"Unloading nvidia module: "
         rmmod nvidia > /dev/null 2>/dev/null
         # we don't care if it does not work...?
         success
         RETVAL=$?

         echo
}
configure() {
    echo -n "Configuring XFree86-4 for nvidia"

    if [ ! -f /etc/X11/XF86Config-4.prenvidia ] ; then
       cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.prenvidia
    fi
#replace the line:
#        Driver "nv"
#    (or Driver "vesa")
#
#with
#
#        Driver "nvidia"
#
#In the Module section, make sure you have:
#
#        Load   "glx"
#
#You should also remove the following lines:
#
#        Load  "dri"
#        Load  "GLcore"

/usr/bin/perl -pi -e "s|Driver[[:space:]]*\"nv\"|Driver 
\"nvidia\"|" /etc/X11/XF86Config-4
if ! grep -q "^[[:space:]]*Load[[:space:]]*\"glx\"" 
/etc/X11/XF86Config-4 ; then
    echo "We need to add Load   \"glx\""
fi
if grep -q "^[[:space:]]*Load[[:space:]]*\"dri\"" /etc/X11/XF86Config-4 
; then
    /usr/bin/perl -pi -e "s|Load[[:space:]]*\"dri\"|#Load \"dri\"|" 
/etc/X11/XF86Config-4
fi
if grep -q "^[[:space:]]*Load[[:space:]]*\"GLcore\"" 
/etc/X11/XF86Config-4 ; then
    /usr/bin/perl -pi -e "s|Load[[:space:]]*\"GLcore\"|#Load 
\"GLcore\"|" /etc/X11/XF86Config-4
fi
         success
         echo
}

uninstall() {
    cd /opt/nvidia
    ./nvidia-installer --silent --uninstall
}

case "$1" in
   start)
         start
         ;;
   stop)
         stop
         ;;
   configure)
         configure
         ;;
   uninstall)
         uninstall
         ;;
   *)
         echo $"Usage: $0 {start|stop|configure|uninstall}"
         exit 1
esac

exit $RETVAL


C.M. Connelly wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 
> An option to installing the nVidia drivers with nVidia's installer
> is to get the dell-nvidia and dkms packages from Dell's support
> website (search for dell-nvidia and dkms).  The best thing about
> this approach is that the driver will be recompiled when the
> machine is rebooted with a new kernel.
> 
> As a (perhaps irrelevant) data point, I'm running a PowerEdge
> 400SC with an nVidia Corporation GeForce3 Ti 200 and a DVI
> connection to a Dell 2000FP monitor at the full 1600x1200
> resolution.  Works great with the nVidia drivers; only the analog
> connection works for X with the XFree driver.
> 
> I have a GeForce4 card with the same monitor at home in my Debian
> system; works great with the Debian-packaged nVidia drivers.
> 
>    Claire
> 
> *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
>   Claire Connelly                              cmc at math.hmc.edu 
>   Systems Administrator                          (909) 621-8754   
>   Department of Mathematics                 Harvey Mudd College
> *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.1 (GNU/Linux)
> Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>
> 
> iD8DBQFBUb57B0pE8d7vd8wRAobXAJ9fLysDccEY3nn4f+xPkA3ZeEFGMgCggz80
> vhQ1XyztGmoIG7s7w3Vo9kY=
> =/1P5
> -----END PGP SIGNATURE-----
> _______________________________________________
> CentOS mailing list
> CentOS at caosity.org
> http://www.caosity.org/mailman/listinfo/centos
> 
> 
> 


-- 
John Newbigin - Computer Systems Officer
School of Information Technology
Swinburne University of Technology
Melbourne, Australia
http://www.it.swin.edu.au/staff/jnewbigin


--__--__--

Message: 10
Date: Fri, 24 Sep 2004 09:07:06 +1000
From: John Newbigin <jn at it.swin.edu.au>
To: Beth Curotto <bcurotto at abni.com>
Cc: CentOS Mailing List <centos at caosity.org>
Subject: Re: [Centos] Need apache ftp help please

As you can see from the other posts, ftp is tricky.  Someone already 
suggested that you use scp/ssh which is what I would recommend.  There 
is a decent windows program called winscp which is similar to windows 
ftp programs.

There is also a command line tool from putty called pscp.

When it comes to NAT, you need to look at both the internal and external 
networks separately.

Firstly, assuming you want the external network (The internet) to 
connect to your web server, you need to allow port 80.  If you want the 
external network to talk to your ssh server (for scp) then you need port 
22 as well.

If ssh is only for internal then you don't need to worry about NAT.

Also (AFAIK) if you are using NAT then there should be a 1 to 1 mapping 
from internal to external IP addresses, in which case it is quite likely 
that all ports are translated and forwarded anyway.  If you mean you 
have a 1 to many (Only one IP on the internet) then you need to nominate 
which IP of the many to forward connections to (port forwarding).

None of this has anything to do with a command line and everything to do 
with reading the manuals/FAQs/HOWTOs etc.

John.

Beth Curotto wrote:

> System = CentOS / Apache 2.0 / HTML files location =  /var/www/html
>  
> Nat'd IP - ports 80, 20, 21 already opened & routed to internal ip.
>  
> I desperately need the quick & dirty solution.
>  
> I need a setup where one user can ftp from another desktop (windows) to 
> upload new website files. I currently have CuteFTP, but will use 
> anything needed at this point.
>  
> I need to try to test this today. VERY new to linux, I am completely 
> bogged down trying to learn command-line syntax.
>  
> Thanks in advance, Beth
>  
>  
>  
>  


-- 
John Newbigin - Computer Systems Officer
School of Information Technology
Swinburne University of Technology
Melbourne, Australia
http://www.it.swin.edu.au/staff/jnewbigin


--__--__--

Message: 11
Date: Thu, 23 Sep 2004 22:51:14 -0400 (EDT)
From: jabevan at shistudios.com
To: centos at caosity.org
Subject: [Centos] HOWTO?  Upgrade Centos-2 to Centos-3

I've been Googling on this all day, installing GPG Keys, and trying
different yum configurations.  I noticed a similar question in the list a
couple of months ago about going from RHEL to Centos-3, but the answer
wasn't definitive.

Has anyone done this?  Can this be done?  Can it be done with yum?  If so,
how?

When I 'yum update' I get /usr/bin/yum, yummain.main, yummain.py,
clientStuff.py errors, and a "ValueError: unpack list of wrong size"
error.

Would definitely appreciate any direction.

Thanks,
JAB*


--__--__--

_______________________________________________
CentOS mailing list
CentOS at caosity.org
http://www.caosity.org/mailman/listinfo/centos


End of CentOS Digest



More information about the CentOS mailing list