[Bulk] [CentOS] hda dma seek errors
BRUCE STANLEY
bruce.stanley at prodigy.net
Wed Aug 3 13:01:01 UTC 2005
--- Rohan Walsh <rohan_walsh at yahoo.com.au> wrote:
> On Tue, 2005-08-02 at 23:58 -0400, Kanwar Ranbir Sandhu wrote:
> > On Tue, 2005-02-08 at 19:57 -0700, BRUCE STANLEY wrote:
> > > I am getting occasional seek error on my boot drive.
> > > The messages are as follows:
> > >
> > > pshda: dma_intr: status = 0x51 { Drive ReadySeekComplete Error }
> > > hda: dma_intr: error= 0x84 { DriveStatusError BadCRC }
> > > ide: failed opcode was: unknown
> >
> > I've recently seen similar errors on an old server here, and all my
> > Googling seems to indicate an early sign of imminent drive failure.
> >
> > Some people reported resolving the issue by making changes to DMA
> > settings with hdparm, or changing something in the BIOS. However, in
> > most cases, the recommendations were:
> >
> > 1. Backup data, ASAP, and wait for failure before moving to new disk
> > 2. Use fdisk to map out the bad sectors.
> > 3. Get a new HD, ASAP.
>
> I used these errors as a good reason to buy a bigger drive and the new
> drive had the same error messages. After testing with seagates tool, I
> can find no problem with either drive. I disable dma as a temporary
> solution, but I think it is not a drive fault in my case. Do back up :)
>
How did you go about disabling dma?
More information about the CentOS
mailing list