[CentOS] using various IDE or SCSI hard drive interfaces withCentOS Linux questions

Thu Aug 18 17:47:44 UTC 2005
Robert Hanson <roberth at abbacomm.net>

} -----Original Message-----
} From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On
} Behalf Of Les Mikesell
} Sent: Thursday, August 18, 2005 10:32 AM
} To: CentOS mailing list
} Subject: RE: [CentOS] using various IDE or SCSI hard drive interfaces
} withCentOS Linux questions
} 
} On Thu, 2005-08-18 at 11:29, Robert Hanson wrote:
} 
} > bottom line is, just about every type of hard drive storage interface
} driver
} > (as well as any other relevant driver types) is/are included in the
} CentOS
} > linux distribution?
} 
} Drivers tend to be per controller type and the complication is that the
} ones you need to boot are detected during the install process and
} included in the initrd that is built then.   If you move the boot drive
} or clone the system to a machine with a different controller, you have
} to adjust /etc/modprobe.conf (or conf.modules, or modules.conf or
} whatever they call it that week...) to include the kernel module you
} need, and then rebuild the initrd image.  It's possible but not much
} fun to do this from the install disk in rescue mode after the swap.
} 
} --
}   Les Mikesell
}     lesmikesell at gmail.com
} 
} 
} _______________________________________________
} CentOS mailing list
} CentOS at centos.org
} http://lists.centos.org/mailman/listinfo/centos

interesting. thanks.

i should be ok and i dont really want to "have to" learn how to do that yet
i probably should.

ummm lets say i have a two compaqs.. 1850R and a dl380... they look
identical yet obviously would have some minor differences.

mix in some CentOS 4 :-)

 and so, if i load and config the 1850R with 4 scsi drives in raid5 array
and get functional with CentOS, let's say i want to take all 4 drives and
stuff them in correct order in a dl380 *cold*...

possibly different SCSI controllers.... yet nothing CentOS couldnt handle
IMHO...

....will that work provided i have done all the low level smartstart cd
stuff before hand???

im thinking it should...

i should have the extra hardware to test this soon anyways yet am wondering

- rh

--
Robert Hanson
Abba Communications
http://www.abbacomm.net