On Wed, 2005-08-03 at 11:52 +0900, Dave Gutteridge wrote: > >I thought that could be it until noticing the 40.0 GB capacity. > > > > > Correct, the 40GB thing is not my card reader, but it's an external hard > drive connected by firewire. > > >Should have asked before: What does "lsusb" show? Might find something > >by googling the USB device information. > > > [root at localhost dave]# lsusb > Bus 001 Device 008: ID 0b28:1002 Kenwood Corp. > Bus 001 Device 007: ID 0b28:1001 Kenwood Corp. > Bus 001 Device 006: ID 04a9:2207 Canon, Inc. CanoScan 1220U > Bus 001 Device 005: ID 056a:0013 Wacom Co., Ltd > Bus 001 Device 004: ID 0411:0059 MelCo., Inc. > Bus 001 Device 003: ID 03eb:3301 Atmel Corp. 4-port Hub > Bus 001 Device 002: ID 0451:1446 Texas Instruments, Inc. TUSB2040/2070 Hub > Bus 001 Device 001: ID 0000:0000 > > I think the card reader is listed under "Melco". My card reader is a > "Buffalo" brand card reader, but I looked Melco up on the net, and it > seems like the two brands are the same company. Yup - my "Memorex" USB key shows up as "Trek Technology (S) PTE, Ltd" > There's one other oddity here: Why is my Kenwood Audio device (a stereo > that I can play computer audio with) showing up twice? Dunno - Perhaps command and data channels? > Anyway, the Kenwood is working fine, so if it ain't broke... > More importantly, is there anything I can do with this information about > the Melco thing? Googling with the additional info got me nothing definitive. Only thing so far that seemed potentially relevant was about a memory card in an 8- in-1 card reader: > > So in short: Try adding this line to your /etc/modprobe.conf file: > > > > options scsi_mod max_luns=8 Worth a shot. Phil