[Centos] 3Ware 9xxx 9500S-4LP SATA Raid with CentOS3.3?

Mon Feb 21 02:40:04 UTC 2005
Seth Bardash <seth at integratedsolutions.org>

There is not an easy way to build you a driver disk or explain how to
install the driver with the existing system. You need to look at what's
involved.

Building the driver on an existing system with the same revision kernel on a
disk you can get to without the driver.
Getting the driver into /lib/modules/2.4.21-27.0.2.ELsmp/kernel/drivers/scsi
Getting the driver installed in the initrd image for booting
Testing this image and the driver.
Creating a floppy with this driver so you can install from it.

I suggest that the easiest way to do this might be to leave the existing
array in place and just add the driver from source or put a separate boot
disk on the machine on an IDE port.

We hope to have a machine for testing and building the Centos 3.3 and 3.4
drivers soon but it may not be available for a while.

Sorry I can't help more.



Seth Bardash

Integrated Solutions and Systems

719-495-5866

Failure can not cope with perseverance! 

> -----Original Message-----
> From: centos-bounces at caosity.org 
> [mailto:centos-bounces at caosity.org] On Behalf Of Sven
> Sent: Sunday, February 20, 2005 7:09 PM
> To: 'CentOS discussion and information list'
> Subject: AW: [Centos] 3Ware 9xxx 9500S-4LP SATA Raid with CentOS3.3?
> 
> I have seen that the 3w-9xxx is build in in the 2.6.10 kernel.
> Maybe a way is to update my 2.4 kernel to 2.6.10?
> 
> But i dont know that this is a good way. 
> I have many software running and i don´t know that all 
> software will running
> after the update.
> 
> Cu Sven
> 
> 
> 
> 
> _______________________________________________
> CentOS mailing list
> CentOS at caosity.org
> http://lists.caosity.org/mailman/listinfo/centos
> 
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.1.0 - Release Date: 2/18/2005