mv initrd-2.4.21-27.0.2.ELsmp.img initrd-2.4.21-27.0.2.ELsmp.img_orig copy 3w-9xxx.o for your system to /lib/modules/2.4.21-27.0.2.ELsmp/kernel/drivers/scsi make sure there is an entry in /etc/modules.conf like this: alias scsi_hostadapter1 3w-9xxx The entry: scsi_hostadapter1 in the above may be different.... run mkinitrd /boot/initrd-2.4.21-27.0.2.ELsmp.img 2.4.21-27.0.2.Elsmp Now you have the driver install done try it by rebooting and see if the 9500 is mounted at boot time. Seth Bardash Integrated Solutions and Systems 719-495-5866 Failure can not cope with perseverance! > -----Original Message----- > From: centos-bounces at caosity.org > [mailto:centos-bounces at caosity.org] On Behalf Of Sven > Sent: Friday, February 25, 2005 1:51 PM > To: 'CentOS discussion and information list' > Subject: AW: [Centos] How to install 3ware Modules? > > In /boot i have the initrd-2.4.21-27.0.2.ELsmp.img > But what i must do exactly now? > > -----Ursprüngliche Nachricht----- > Von: centos-bounces at caosity.org [mailto:centos-bounces at caosity.org] Im > Auftrag von Hirsh, Joshua > Gesendet: Freitag, 25. Februar 2005 21:05 > An: 'CentOS discussion and information list' > Betreff: RE: [Centos] How to install 3ware Modules? > > > Or have you another good way to install the driver because > the problem > > is that if the driver is not in the kernel the raid will > not boot from > > them or? > > > Two words: initrd image. > > Google can help you out quite easily with creating one. > > > > Regards, > > -Joshua > _______________________________________________ > CentOS mailing list > CentOS at caosity.org > http://lists.caosity.org/mailman/listinfo/centos > > > > > _______________________________________________ > CentOS mailing list > CentOS at caosity.org > http://lists.caosity.org/mailman/listinfo/centos > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005