We had a RH 7.3 system that we were using highpoint cards in. That took a while to get working correctly a year ago or so. Moving to Centos we were not able to get them to work correctly so we went with the 3ware 8500 series (one 4 port and one 2 port) and it is working like a charm. I think the HPT was a rocketraid 1640. Good luck if you stick it out with the HPT controller. Andrew -----Original Message----- From: centos-bounces at caosity.org [mailto:centos-bounces at caosity.org]On Behalf Of Wade Bowlin Sent: Wednesday, January 12, 2005 4:11 AM To: CentOS discussion and information list Subject: Re: [Centos] CentOS 3.3 and High Point Raid Cards On Mon, 10 Jan 2005, Ho Chaw Ming wrote: > Dear all, > > Anyone have experience using Hight Point Rocketraid 464 on a CentOs 3.3 > system? High Point drivers seem to only support a really outdated kernel > version and I am having problems getting the system to recognise the raid > card (and thus the whole raid). > I'm using one as an extra ide controller with out using raid on the card. I just use software raid instead. I never got it to work in linux. Tried to compile the drivers a few times but they always failed. - Wade _______________________________________________ CentOS mailing list CentOS at caosity.org http://lists.caosity.org/mailman/listinfo/centos