On Tue, 2005-05-17 at 18:57 -0700, Richard Kurth wrote: > I am tying to mount a second hard drive to my server with CentOS > installed on the primary hard drive. I need to get some data off of > the drive. It also has Linux installed on it. It was the primary hard > drive on the system it was installed on. > When I set it up as the second disk it will not boot the drive because > it has /boot partition on it. So it conflicts with the /boot partition > on the primary drive. How can I boot up the computer so it sees this > drive so I can move the data across to the primary drive. Boot in rescue mode and use e2label to change the filesystem labels on the second drive. -- Ignacio Vazquez-Abrams <ivazquez at ivazquez.net> http://centos.ivazquez.net/ gpg --keyserver hkp://subkeys.pgp.net --recv-key 38028b72 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.centos.org/pipermail/centos/attachments/20050517/1dad8174/attachment-0005.sig>