[CentOS] SELinux threads, cynicism, one-upmanship, etc.

Thu Nov 17 16:42:08 UTC 2005
Will McDonald <wmcdonald at gmail.com>

On 17/11/05, Lamar Owen <lowen at pari.edu> wrote:
>  When SATA hotswap works will do it with SATA carriers; currently the
> hardware will allow the hotplug, but the kernel has problems dealing with
> it.

I've had no problems hot-swapping SATA drives on 3Ware 8006-2LP
controllers using Vantec MRK-200ST-BK drive bays and caddys. It must
be said this is just disks in JBOD mode though, no underlying hardware
or overlying software RAID.

You can "park" the disks in 3warecli, swap them out and then rescan
for new disks[1].

The drive caddys are a bit "boy-racer" and not as solid as good SCA
caddys from say Compaq or Dell but they do the job.

Will.

[1]

[root at backupserv sbin]# 3warecli
3ware CLI> info
List of controllers
-------------------
Controller 2: 8006-2LP (2)
3ware CLI> info c2
Controller: c2
-------------
Driver:   1.26.00.039
Model:    8006-2LP
FW:       FE8S 1.05.00.068
BIOS:     BE7X 1.08.00.048
Monitor:  ME7X 1.01.00.040
Serial #: L18501A5220444
PCB:      Rev5
PCHIP:    1.30-66
ACHIP:    3.20


# of units: 2
               Unit 0: JBOD 372.61 GB ( 781422768 blocks): OK
               Unit 1: JBOD 372.61 GB ( 781422768 blocks): OK

# of ports: 2
               Port 0: ST3400832AS 3NF0GD99 372.61 GB (781422768
blocks): OK(unit 0)
               Port 1: ST3400832AS 3NF0GE2S 372.61 GB (781422768
blocks): OK(unit 1)

3ware CLI> maint remove c2 u0
Removed unit /c2/u0, you may now safely unplug the drives.
3ware CLI> info c2
Controller: c2
-------------
Driver:   1.26.00.039
Model:    8006-2LP
FW:       FE8S 1.05.00.068
BIOS:     BE7X 1.08.00.048
Monitor:  ME7X 1.01.00.040
Serial #: L18501A5220444
PCB:      Rev5
PCHIP:    1.30-66
ACHIP:    3.20


# of units: 1
               Unit 1: JBOD 372.61 GB ( 781422768 blocks): OK

# of ports: 2
               Port 1: ST3400832AS 3NF0GE2S 372.61 GB (781422768
blocks): OK(unit 1)
3ware CLI> maint rescan
Rescanning controller /c2 for units and drives ...Done.

3ware CLI> info c2
Controller: c2
-------------
Driver:   1.26.00.039
Model:    8006-2LP
FW:       FE8S 1.05.00.068
BIOS:     BE7X 1.08.00.048
Monitor:  ME7X 1.01.00.040
Serial #: L18501A5220444
PCB:      Rev5
PCHIP:    1.30-66
ACHIP:    3.20


# of units: 2
               Unit 0: JBOD 372.61 GB ( 781422768 blocks): OK
               Unit 1: JBOD 372.61 GB ( 781422768 blocks): OK

# of ports: 2
               Port 0: ST3400832AS 3NF0GD99 372.61 GB (781422768
blocks): OK(unit 0)
               Port 1: ST3400832AS 3NF0GE2S 372.61 GB (781422768
blocks): OK(unit 1)
3ware CLI>