On Mon, 2005-10-10 at 15:51 +0200, kadafax wrote: > I found drivers who seems to be arch independent at > http://qlogic.com/support/oem_product_detail.asp?p_id=680&oemid=284&oemname=QLA200 > > but, I've got the same error: > --- > # ./qlinstall > > #*********************************************************# > # QLogic HBA Linux Driver Installation # > # Version: 1.00.00b2pre16 # > #*********************************************************# > > Kernel version: 2.6.9-11.ELsmp > Distribution: CentOS release 4.1 (Final) > > Found QLogic Fibre Channel Adapter in the system > 1: QLA6312 > Installation will begin for following driver(s) > 1: qla2xxx version: v8.00.03b > > Preparing... > ################################################## > error: %pre(qla2xxx-v8.00.03b-1.noarch) scriptlet failed, exit status 255 > error: install: %pre scriptlet failed (2), skipping qla2xxx-v8.00.03b-1 > --- > Do you know what is this "scriptlet" error? > thanks > > > Johnny Hughes wrote: > > > >> If you installed the x86_64 arch ... Yes, it looks like that RPM was > >> written for an i686 kernel. > >> > >> Where did you get the RPM? Do that have a SRPM? Do they have an RPM > >> for x86_64. > >> > >> > > From the CD shipped with the card (by Dell, it was an all in one: > > PE-2850 & QLA-200HBA & EMC AX-100). There is no source on the CD nor > > X86-64 version. I can't find any driver for the QLA-200 on > > support.qlogic.com, except the windows one... I keep searching. > > I can't really tell without the source code. You might try installing i386 distro ... also, before that you might see if changing the text in /etc/redhat-release to what it says for the upstream vendor will make it work. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.centos.org/pipermail/centos/attachments/20051010/75a362ec/attachment-0005.sig>