On Thu, 2005-10-20 at 12:52 +0200, Jujo wrote: > Mensaje citado por rado <rado at rivers-bend.com>: > > Hello I think it may be a bug; take a look to bug 1050; it seems as the dmraid > package is buggy > > Regards > > > Hi! > > A few days back ...I upgraded using yum update. I did this on 3 > > machines of which 2 of the machines are mirrors. I have no problems > > w/the other 2 machines which leads me to believe that the fault lies in > > 2.6 but rather I think I have a hard drive failure. > > while the system is trying to boot up. > > > > it goes to: grub stage 2....that's the first thing I seem to find > > outside of taking forever to find the drives. > > > > then when it is booting....lots of hdc errors > > > > here's an excerpt from /var/log/messages: > > > > ide: failed opcode was: unknown > > Oct 19 20:34:46 rbmain1 kernel: end_request: I/O error, dev hdc, sector > > 552 > > Oct 19 20:34:46 rbmain1 kernel: Buffer I/O error on device hdc, logical > > block 69 > > Oct 19 20:34:46 rbmain1 kernel: hdc: drive not ready for command > > Oct 19 20:34:46 rbmain1 kernel: hdc: status error: status=0x10 > > { SeekComplete } > > thx for your reply! Oh boy!, now what to do! I have no clue what dmraid is! I guess I will google up on this! My other raided system works just find thru the upgrade. If I get rid of dmraid...hummmm...what happens to md0 & md1? as the raid1 arrays??? thx john rose > >