Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His reply was: > It's ok. You know, lm85 and adt7463 are pretty similar. > Sometimes, hardware designer or manufactory guys will use them mixed. So, in Raphael's sensors.conf replace the line 'chip "lm85-i2c-*-2e"' with 'chip "adt7463-i2c-*-2e"' and all will be well. Kirk Bocek