[CentOS] ATI RS350 chipset
Karanbir Singh
mail-lists at karan.org
Sun Feb 26 00:46:42 UTC 2006
Peter Farrow wrote:
> Ok,
>
> Here is an update, if I use a kernel later than 2.6.9 eg a fc4 2.6.13
> kernel dma works, but I get openswan issues.
>
> In this directory for my orginal kernel:
>
> /usr/src/kernels/2.6.9-22.0.2.EL-smp-i686/include/linux
>
> I looked at the pci_ids.h header file and found this line:
> /* ATI IXP Chipset */
> #define PCI_DEVICE_ID_ATI_IXP_IDE 0x4349
>
> I spoke to my buddy at ATI and he reckons it should be ok just to change
> the header file, I haven't checked the fc4 kernel source yet
> So I changed it to 0x4369 to match my chipset, [found this from a bit of
> googling to support this theory]
>
> ------------------------
> When I try to make a new kernel I get this error (using make rpm)
> --------------------------
> CHK include/asm-i386/asm_offsets.h
> /bin/sh: arch/i386/kernel/asm-offsets.s: No such file or directory
> UPD include/asm-i386/asm_offsets.h
> mv: cannot stat `include/asm-i386/asm_offsets.h.tmp': No such file or
> directory
> make[2]: *** [include/asm-i386/asm_offsets.h] Error 1
> make[2]: *** Waiting for unfinished jobs....
> HOSTCC scripts/basic/split-include
> HOSTCC scripts/basic/docproc
> error: Bad exit status from /var/tmp/rpm-tmp.45549 (%build)
> RPM build errors:
> Bad exit status from /var/tmp/rpm-tmp.45549 (%build)
> make[1]: *** [rpm] Error 1
> make: *** [rpm] Error 2
> -----------------------
>
> I found the missing asm-offsets.h from the equivalent uni-proc kernel,
> and copied it across, however the "make clean" part of "make rpm"
> deletes this file.
>
> Question is, does anyone know why this file would be missing, has
> anyone seen it before?
>
> Any advice is welcome!
>
> Pete
>
>
>
>
>
>
>
> Peter Farrow wrote:
>> Dear All,
>>
>> I just upgraded my firewall/smarthost to a 2.6 GHz P4 on a Gigabyte
>> board with the ATI RS350 chipset. Unfortunately the chipset isn't
>> support on the kernel and I get slow disk performance
>>
>> lspci gives this:
>> lspci
>> 00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge
>> 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP PCI/AGP Bridge
>> 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4367 (rev
>> 01)
>> 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4368 (rev
>> 01)
>> 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4365 (rev
>> 01)
>> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 03)
>> 00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4369 (rev 01)
>> 00:14.2 IDE interface: ATI Technologies Inc ATI 436E Serial ATA
>> Controller (rev
>> 01)
>> 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 436c (rev 01)
>> 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4362 (rev 01)
>> 00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown
>> device 4361 (
>> rev 03)
>> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 9100
>> PRO IGP
>>
>>
>> I am running this kernel:
>>
>> 2.6.9-22.0.2.ELsmp
>>
>>
>> Anybody know if there is a kernel out there to support this chipset?
>>
>> P.
>>
>>
the issue you are trying to solve is the same as the issue the guys with
the Turion64 laptops are trying to work through - chase the same
details. 2.6.9 will work fine with your mobo, but needs some param's
setup properly.
--
Karanbir Singh : http://www.karan.org/ : 2522219 at icq
More information about the CentOS
mailing list