At 06:23 PM 2/21/2006, Johnny Hughes wrote: >On Tue, 2006-02-21 at 17:09 -0500, Robert Moskowitz wrote: > > At 04:11 PM 2/21/2006, John Pierce wrote: > > > > To the end of /boot/grub/grub.conf I added the line: > > > > > > > > psmouse.proto=imps > > > > > >Well the psmouse.proto=imps needs to be added to one of the kernel > > >command lines in grub.conf, not on a line by itself. > > > > where do I put that option? > > >after the "quiet" add a "space" and try psmouse.proto=imps > >also try psmouse.proto=bare > >you might also try this in /etc/X11/xorg.conf for the mouse driver (that >works for my belkin switch and a logitech scroll mouse): > > Option "Protocol" "ExplorerPS/2" I want to say that nothing worked, in changing configurations, but moving the system to the first KVM did. While in init 3 boot mode, I ran: Xorg -configure It did not recognize the mouse. I did not read further in http://www.gentoo.org/doc/en/xorg-config.xml to see that I should have tried xorgconfig and see what it would do. Well, since the mouse is working now, I think I am going to try these two to see what they do... Again, thanks for all the great help. I really don't know how I am going to document this one. Probably has something to do with the power in my KVMs. BTW, they are old ATEN Master View plus CS-138D. These are 2U 8 port KVMs that support cascading from ports 1-6 (cannot cascade from 7 or 8, and now I think it is a power problem). According to ATEN's old records, these were suppose to be for the EU market. But they were in original manufacturing packaging with 110 power transformers. I currently have 12 ports in use. One goes to my work bench where I have an old KVM that does not support the cascade, so I have to switch that manually (allowing for multiple systems in development). If I could find a CHEAP 1U 16 porter that could use my current cables (well that may take a 2U), I would jump at it. I will probably have to, as in another location I had a CS-104 and put in an LCD monitor, but the 104 could not drive it. I suspect that when I go to replace my very old CRT here, I will need that new KVM! Oh, for systems in production in my NOC, the score card is: NT 1 W2K 4 XP 1 Centos 4 Astaro 1 One of the Centos is suppose to sundown the NT. But I have to spend the time to get SAMBA with PDC support working on that one. > > >I use a msi wireless keyboard and mouse on a kvm and the only time I > > >see erratic mouse behaviour is when the batteries have gotten low and > > >I put in a full charged set. > > > > Well, I just tried new batteries. > > > > No different. > > > > Now I have cascaded KMS. My graphical Centos boxes are at: > > > > Switch 1, 'port' 8 > > Switch 2, 'port' 1 (port 6 on Switch 1 is the cascading port) > > > > This system is on Switch 2, 'port' 5 > > > > Tomorrow morning, I will move it to port 4 on switch 1 (only open > > port on switch 1) and see what happens. > > > > The frustrating part is that everything was fine until I did that > > java install. folllowed by a yum update (which only pulled down a > > update to yum). > > > > If no change, it is back to reinstall. Maybe that is just as > > well. I had to do a manual disk partition and did not make > > notes. Redoing it will force me to make some notes.... > > > >_______________________________________________ >CentOS mailing list >CentOS at centos.org >http://lists.centos.org/mailman/listinfo/centos