On Fri, 2006-01-06 at 15:41, Bryan J. Smith wrote: > > If you do everything in the right order, you can replace > > a failed hot-swap scsi drive and rebuild the software > > raid without shutting the machine down. > > Again, SCSI cards must have some added notification, or at > least the ones you are using. I guess that would make sense, > because there _is_ the "host adapter" on-board. Or at least the typical hardware/driver errors aren't fatal. > In any case, 3Ware cards do _not_ do it for JBOD. I'm sure you are right about the behavior but it still seems surprising that the driver for what appears to be hot-swap devices actually isn't. -- Les Mikesell lesmikesell at gmail.com