Hi, I'm building a firewall/router on Centos. I'm using Shorewall but have currently stopped and cleared the firewall rules to isolate the routing problem. My firewall box has 5 interfaces in it but currently only two are involved in the problem. eth1: inet addr:192.168.1.224 Bcast:192.168.1.255 Mask:255.255.255.0 eth3: inet addr:192.168.202.1 Bcast:192.168.202.255 Mask:255.255.255.0 eth1 is connected to a switch that is connected to a router. The router is 192.168.1.1 and is the internet gateway. eth3 is connected to a different switch. I have another Centos box that is connected to the switch shared with eth3. It's interface is: eth3: inet addr:192.168.202.10 Bcast:192.168.202.255 Mask:255.255.255.0 I want to provide internet connectivity to this 2nd machine routed through the firewall. Currently, I can reach two machines on the 192.168.1.0/24 network (.5 and .3) but I can't reach the router (.1) or anything outside. I'll paste the routing tables from both machines below. Thanks in advance for your help. ---Marc Firewall routing tables: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.255.255.254 U 0 0 0 eth4 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.202.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth4 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 192.168.202.10 routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.202.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.16.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.202.1 0.0.0.0 UG 0 0 0 eth1 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20060718/53d83e31/attachment-0004.html>