On Fri, Jul 14, 2006 at 07:53:21AM -0500, Les Mikesell wrote: > > The procedure you use with windows is to install the disk driver it > will need under vmware before the copy. Everything else will > auto-detect. good to know, thanks. > The piece that I haven't been able to match is Windows (server versions) > ability to convert a standard NTFS disk to dynamic, then add a mirror > on the fly. If you didn't install on RAID1 to begin with and remove > one of the partitions, how do you get a working system to the point > where you can add a mirror? You'd probably have a fair chance of > making things work with an rsync copy while running, followed by > an rsync in single user mode with databases, etc. shut down, but > what I really want is a live mirror that would always be up to date > any time the physical server died. Ah, i see. I have read (but not actually tried) that you can convert a filesystem on a raw device to a raid1 but I can't remember the details. There were issues with needing extra space at the end of the physical partition. I imagine if you partitioned your disk with an extra cylinder after each partition it would work. danno -- dan pritts - systems administrator - internet2 734/352-4953 office 734/834-7224 mobile