[CentOS] hdparm strangeness
Chris Mauritz
chrism at imntv.com
Sat Mar 11 12:54:42 UTC 2006
Johnny Hughes wrote:
> On Fri, 2006-03-10 at 19:39 -0500, Chris Mauritz wrote:
>
>> Sudev Barar wrote:
>>
>>> On 11/03/06, Chris Mauritz <chrism at imntv.com> wrote:
>>>
>>>
>>>> I've got a brand new .5U P4 system running several (I think) Seagate
>>>> 80gig SATA drives. I tried to copy data from the first drive (sda) to
>>>> the second drive (sdc) and was only getting about 1.7megs/sec. So I
>>>>
>>>>
>>> The only time I saw similar issue was on a MoBo with SiL sata
>>> controller chip. It was overcome by plugging in a SATA pci card :-)
>>>
>>>
>> I'm reasonably sure it's a garden variety intel ICHX chipset on an Intel
>> motherboard. Dmesg doesn't really offer any clues (at least none that
>> I'm able to decipher).
>>
>> Cheers,
>>
>> _______________________________________________
>>
>
> Chris,
>
> Use the command:
>
> dmidecode
>
> This will tell you everything you might want to know about your
> machine ...
>
> I do this on all my machines in the /root directory:
>
>
> dmidecode > dmidecode.out
>
> Then I can review that text file whenever I want.
>
That was a great suggestion, and very informative (since the box is
phsically about 100 miles away and I wasn't the one who ordered or
installed it "way back when"). The only mention of the IDE
ports/controller is this:
Handle 0x000C
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000D
DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
dmesg yields:
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: HDS722512VLSA80, ATA DISK drive
hdc: HDS722512VLSA80, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 241254720 sectors (123522 MB) w/7938KiB Cache, CHS=15017/255/63
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 241254720 sectors (123522 MB) w/7938KiB Cache, CHS=15017/255/63
libata version 1.11 loaded.
ata_piix version 1.03
ata: 0x1f0 IDE port busy
ata: 0x170 IDE port busy
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1052216k swap-space (priority -1)
Adding Swap: 1052248k swap-space (priority -2)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Any suggestions would be greatly appreciated.
Best regards,
More information about the CentOS
mailing list