for gigabit don't use crossover cable - the cards should autoneg crossover, and crossover cable has to be different than the normal 100 cross to work for giga... On Sat, 4 Mar 2006, Jure Pečar wrote: > > Hi all, > > I have two HP DL145 G1 machines, running centos4 (2.6.9-22.0.2.ELsmp). > Nics are recognized as: > > eth0: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) > 10/100/1000BaseT Ethernet 00:00:1a:19:f1:05 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap > [1] > eth1: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) > 10/100/1000BaseT Ethernet 00:00:1a:19:f1:04 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap > [1] > > Both machines are wired in the same way: eth0 is connected do 100mbit > switch, eth1 to a gigabit switch. But: > > # mii-tool > eth0: negotiated 100baseTx-FD, link ok > eth1: negotiated 100baseTx-FD flow-control, link ok > > If I force eth1 to 1000 with ethtool, I get no link and then it > autonegotiates itself back to 100. I can't even get them to talk at gigabit > speed if I connect both machines together with crossover cable! > > Am I doing something wrong or is this a hardware problem? > > >