On Thu, 9 Mar 2006, David Mansfield wrote: > On Wed, 2006-03-08 at 13:31 -0500, Robin Mordasiewicz wrote: >> Has someone created a how to or a tutorial for installing/configuring >> DELL openmanage on centos ? >> > > Heh. Just did it yesterday. > > Here's my cookbook. It leaves out some info because it's written for me > and I know what I'm talking about ;-) If you need any clarification, > let me know. > > When you're finished, you should be able to find the web interface via > > https://yourmachine.yourdomain.com:1311 > > installing omsa > =============== > > install net-snmp, net-snmp-utils then use 'chkconfig' and 'service' to > make sure it is running, and will start on subsequent boots > > again, make sure snmpd is running > > download the .tar.gz, e.g from dell website, for example: > OMI-SrvAdmin-Dell-Web-LX-450-32-335_A00.tar.gz > > untar somewhere > > run installer: > sh linux/supportscripts/srvadmin-install.sh --express > > you may need to install compat-libstdc++ first, which comes in the tar file: > rpm -Uvh linux/RPMS/compat-libstdc++-296-2.96-132.7.2.i386.rpm > > it will start automatically on reboot, but to start the first time: > srvadmin-services.sh start > > configure snmp (optional) > ========================= > > to see if dataeng has snmp support: > /etc/init.d/dataeng getsnmpstatus > > if necessary, enable snmp through omsa: > /etc/init.d/dataeng enablesnmp > > NOTE: please fix the email addresses in the next instruction! > > setup trap handling for snmptrapd. edit /etc/snmp/snmptrapd.conf and add: > traphandle default /usr/bin/perl /usr/bin/traptoemail -s localhost -f from at yourdomain.com to at yourdomain.com > > restart snmptrapd > service snmptrapd restart > > setup local snmpd to deliver traps to localhost. edit /etc/snmp/snmpd.conf (probably only v2 is necessary) and add: > trapsink 127.0.0.1 public > trap2sink 127.0.0.1 public > > add the mibs > find /opt/dell/ -name \*.mib -exec cp {} /usr/share/snmp/mibs \; > > tell net-snmp progs to read the mibs. edit /etc/snmp/snmp.conf and add: > mibs +MIB-Dell-10892:StorageManagement-MIB > > restart snmpd > service snmpd restart > This is excellent. Maybe you could add in a blurb about percsnmpd and how to configure the megaraid driver