On Wed, 2006-05-24 at 00:26 +0100, Karanbir Singh wrote: > Mace Eliason wrote: > > I have been searching the internet looking for info on setting up a > > cluster using csgfs repo, but I am not sure which files I need. All the > > instruction on the RH site talk about using up2date but that doesn't work. > > Is there a yum groupinstall "Cluster" ? I don't see anything on the > > grouplist. > > Which files should be install to run a cluster. I realize it depends on > > my situation. Basically I want to cluster LAMP. > > > > > > > > Karanbir Singh wrote: > >> Tom Brown wrote: > >> > >>>> Would a cluster be the way to go? Ideally we would like 2-? severs > >>>> setup that are all identical and sharing the load as need be, and if > >>>> one fails users would notice nothing. > >>>> > >>>> > >>> personally is you want a commercial system i would go for Zeus as it > >>> installs onto commodity x86 hardware or if you want open source then the > >>> Linux LVS project is a good bet > >>> > >>> > >> > >> take a look at the csgfs repo's as well - that has pretty much > >> everything you need to make this sort of a cluster. > >> > >> > > the docs at http://www.centos.org/docs/4/ should all work fine, and with > the right repo setup in /etc/sysconfig/rhn/sources up2date should also > work, you need a line at the end that goes like this : > > yum centos4-csgfs http://mirror.centos.org/centos/4/csgfs/$ARCH/ > OR ... use yum to install the required packages after adding the csgfs repo file per: http://mirror.centos.org/centos/4/csgfs/Readme.txt -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: <http://lists.centos.org/pipermail/centos/attachments/20060524/9ab9d00e/attachment-0004.sig>