Ralph Alvy wrote: > CentOS 4.3 (fully updated, including CentOS Plus kernel). > > Running KDE 3.5.2 (fully updated from redhat.kde repo). > > I can't seem to get the OS to recognize my SD card when inserted into my USB > card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing > happening when the card is inserted. USB-STORAGE module is loaded. > Hi all folks, It's strange for me too, i have the same issue on the card reader except than i have two different photo cam and i'm able to read the CF card (i.e. Kingston Compact Flash CF 512) but not the SD one's (i.e. PNY 256 MB SD) in the same card reader. No dmesg info about it and no log reacts when the SD is inserted. Here is the info i can provide btw, feel free to suggest me for more: USB Mass Storage device found at 5 scsi3 : SCSI emulation for USB Mass Storage devices Vendor: TEAC Model: USB HS-CF Card Rev: 4.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0 [root at sparkbox ~]# uname -srvmpio Linux 2.6.9-34.ELsmp #1 SMP Wed Mar 8 00:27:03 CST 2006 i686 i686 i386 GNU/Linux [root at sparkbox ~]# lspci -n 00:00.0 Class 0600: 8086:2580 (rev 04) 00:02.0 Class 0300: 8086:2582 (rev 04) 00:1b.0 Class 0403: 8086:2668 (rev 04) 00:1c.0 Class 0604: 8086:2660 (rev 04) 00:1c.1 Class 0604: 8086:2662 (rev 04) 00:1d.0 Class 0c03: 8086:2658 (rev 04) 00:1d.1 Class 0c03: 8086:2659 (rev 04) 00:1d.2 Class 0c03: 8086:265a (rev 04) 00:1d.3 Class 0c03: 8086:265b (rev 04) 00:1d.7 Class 0c03: 8086:265c (rev 04) 00:1e.0 Class 0604: 8086:244e (rev d4) 00:1f.0 Class 0601: 8086:2640 (rev 04) 00:1f.1 Class 0101: 8086:266f (rev 04) 00:1f.2 Class 0101: 8086:2652 (rev 04) 00:1f.3 Class 0c05: 8086:266a (rev 04) 03:08.0 Class 0200: 8086:1064 (rev 04) [root at sparkbox ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub (rev 04) Subsystem: Dell: Unknown device 01c4 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04) (prog-if 00 [VGA]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at dff80000 (32-bit, non-prefetchable) [size=512K] I/O ports at ecd8 [size=8] Memory at c0000000 (32-bit, prefetchable) [size=256M] Memory at dff40000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) Subsystem: Dell: Unknown device 01c4 Flags: bus master, fast devsel, latency 0, IRQ 169 Memory at dff3c000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: dfe00000-dfefffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: dfd00000-dfdfffff Capabilities: [40] Express Root Port (Slot-) IRQ 0 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 185 I/O ports at ff80 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 193 I/O ports at ff60 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 201 I/O ports at ff40 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at ff20 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 185 Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfc00000-dfcfffff Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at ffa0 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell: Unknown device 01c4 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 217 I/O ports at fe00 [size=8] I/O ports at fe10 [size=4] I/O ports at fe20 [size=8] I/O ports at fe30 [size=4] I/O ports at fea0 [size=16] Memory at dff3bc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) Subsystem: Dell: Unknown device 01c4 Flags: medium devsel, IRQ 177 I/O ports at ece0 [size=32] 03:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 04) Subsystem: Dell: Unknown device 01c4 Flags: bus master, medium devsel, latency 64, IRQ 217 Memory at dfcff000 (32-bit, non-prefetchable) [size=4K] I/O ports at dcc0 [size=64] Capabilities: [dc] Power Management version 2 TIA Jose. > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >