We are using HP SAS (P400) which uses the same cciss driver as other HP RAID controllers. Seems to work fine with CentOS-4.4. Remember to get the battery (BBWC) or you can't alter your raid set once it is created. John. Mark Snyder wrote: > Hi All, first time post so please excuse any blunders > > We are specifying two servers using supermicro X7DBE+ MB and want to add > on a SAS controller for Raid 10. We want to use the CentOS 4.4 X86_64 > distro. > > We are currently considering an Intel CC SRCSAS144E SAS Raid Controller > for the servers using 4 Fujitsu 147 GB SAS HDD, and a Adaptec SASC RAID > 4805 8-port for the server using 6 Fujitsu 147 GB SAS HDD. > > Any feedback on this distro, the supermicro X7DBE+, or SAS controllers > would be appreciated. > > Thanks > > Mark Snyder > JMK Computerized TDIS > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > > -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin