Hello, I'm having problems with lm_sensors on the motherboard Supermicro X6DH8-G2+ sensors-detect gives me the output attached in the textfile sensors-detect-output.txt As soon as I execute the recommended 'modprobe smbus-arp' I receive the following message: FATAL: Module smbus_arp not found. When I execute sensors, I receive the following: ====================================================== [root at matrix ~]# sensors eeprom-i2c-0-57 Adapter: SMBus I801 adapter at 1100 Unknown EEPROM type (8) eeprom-i2c-0-53 Adapter: SMBus I801 adapter at 1100 Unknown EEPROM type (8) ====================================================== I also attached sensors.conf from /etc for reference. I'm using xen-3.0.2 with kernel 2.6.16 and all Hardware Monitoring and i2c stuff compiled as modules (as being done in the standard kernel). My distribution is CentOS-4.4 hence my sensors version is 'lm_sensors-2.8.7-2.40.3' sensors doesn't run either with the non-xen kernel, i.e. the stock kernel that came with CentOS-4.4: kernel-2.6.9-42.0.2.EL Is there any way to get sensors running on this mainboard? Thanks in advance! Regards - Michael -- Michael Kress, kress at hal.saar.de http://www.michael-kress.de / http://kress.net P E N G U I N S A R E C O O L -- Michael Kress, kress at hal.saar.de http://www.michael-kress.de / http://kress.net P E N G U I N S A R E C O O L -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: sensors-detect-output.txt URL: <http://lists.centos.org/pipermail/centos/attachments/20061001/7ebb5808/attachment-0004.txt> -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: sensors.conf URL: <http://lists.centos.org/pipermail/centos/attachments/20061001/7ebb5808/attachment-0004.conf>